LED IPX5 Rain Test Chamber is used to test the water resistance; which is mainly for electronic and electrical products. It can also provide references for product design and quality control.
IPX34 Rain spray test room meet standard:
GB10485-89
1.The inner box of the test is equipped with LED waterproof lighting and a large observation window on the door to facilitate the observation of the test conditions in the box.
2.The shell is made of domestic high quality steel plate, the surface is sprayed with baking paint, beautiful and durable.
3.The equipment has its own water tank and recycled water, so there is no need to build a professional waterproof testing room.Built-in water tank high and low water level alarm monitoring to prevent water pump damage.
4.Automatic compressed air air drying rain board, can drain the excess water in the drip box, to avoid long time water fouling and plug pinhole.
5.The outer case of the equipment is made of high quality stainless steel, the inner case and the turntable are all made of SUS304 stainless steel, with high corrosion resistance.
6.Intelligent control touch screen, LED lighting, high efficiency.
7.Conform to the Test distance for 2.5-3m.
Waterproof Rating:
IPX-1 Protected against falling water Equivalent to 3-5mm rainfall per minute for a duration of 10 minutes.
Unit is placed in its normal operating position.
IPX-2 Protected against falling water when tilted up to 15 degrees - Same as IPX-1 but unit is tested in 4 fixed positions -
tilted 15 degrees in each direction from normal operating position.
IPX-3 Protected against spraying water - Water spraying up to 60 degrees from vertical at 10 liters/min at a pressure of 80-100kN/m2 for 5 min.
IPX-4 Protected against splashing water - Same as IPX-3 but water is sprayed at all angles.
IPX-5 Protected against water jets - Water projected at all angles through a 6.3mm nozzle at a flow rate of 12.5 liters/min at
a pressure of 30kN/m2 for 3 minutes from a distance of 3 meters.
IPX-6 Protected against heavy seas - Water projected at all angles through a 12.5mm nozzle at a flow rate of 100 liters/min at
a pressure of 100kN/m2 for 3 minutes from a distance of 3 meters.
IPX-7 Protected against water immersion - Immersion for 30 minutes at a depth of 1 meter.
IPX-8 Protected against water submersion - The equipment is suitable for continual submersion in water under conditions which are identified by the manufacturer.
| Project Model |
HY-100 |
HY-101 |
HY-102 |
| Studio size (D*W*Hmm) |
800*800*800 |
1000*1000*1000 |
1400*1600*1400 |
| Water spray ring radius |
200mm |
400mm |
600mm |
| Water spray hole size |
Diameter 0.33mm/0.4mm/0.8mm |
| Aperture spacing |
25.4mm/50mm |
| Pendulum swing |
0°~360° (adjustable) |
| Test bed speed |
1r/min(Also can be stepless speed regulation <optional>) |
){kind=link}