SSD manufacturer have an immediate need for a test system that is able to test SSDs as standard generic drives, but to also test for unique SSD drive failure modes and attributes of the underlying solid state technology.
Whole Test System Functions
1. Support Maximum Simultaneous Measurable Quantity is 800 pieces.
2. 100 sets of PCB burn-in boards, each with 8 SSDs, that is, 800 pieces; divided into two turnover trolleys
3. Power supply AC/DC5V 1200W, power of each product: 5V, 5A
4. All SSD products are carried by the test trolley, which can be pulled out and separated from the test box; 2 turnover trolleys
5. Internal temperature hot air circulation, entering from the left and right sides, and returning air at the top of the middle
6. There are fully automatic fresh air inlets on the left and right sides. When the temperature of the product in the inner box exceeds the temperature, the middle exhaust fan is forced to exhaust the air.
7. There are 5 monitoring points for the temperature of the inner box, the upper, middle and lower parts are displayed locally, and the main control temperature point is 1
8. The product has 80 voltage monitoring points and 80 current monitoring points
The RDT test of solid state drives is an important link in the production process of solid state drives. During the RDT test, the split solid state drive RDT test aging cabinet can be used for testing. What is the significance of the RDT test aging cabinet in the testing process? Let's take a look below.
Environmental Instruments Solid State Drive RDT Test Aging Cabinet Test Meaning:
1. Complete reliability verification:
The Reliability Verification Test (RDT) is a rigorous, long-term test of solid-state drives (SSDs) designed to prove that each SSD meets the most stringent quality requirements. All test parameters are designed to verify the drive's Mean Time Between Failure (MTBF) ratings.
2. RDT test conditions:
Sequential/transmission traffic: 128K/256K/512K
Random/transmission traffic: 4K/8K/16K/32K
3. RDT (reliability verification test) results:
ATP performs RDT on SATA M.2 2280 SSDs of various capacities. All SSDs completed RDT without any issues or data mismatches.
The Arrhenius equation is used to calculate the thermal acceleration factor of the failure time distribution of semiconductor devices.
Key takeaways:
ATP performs complete real-world drive-level testing of its SSDs over an extended period of time to verify rated MTBF values, rather than relying on reliability prediction systems. RDT is performed according to JEDEC standards to determine driver reliability and calculate thermal acceleration factors for semiconductor device failure time distribution using the Arrhenius equation. All SSDs completed RDT without issues or data mismatches.
Reliability verification testing is part of the reliability and durability testing developed and performed by SSD to ensure that its products strictly adhere to the highest quality standards.
In general, the main purpose of solid state drive RDT test aging cabinet test RDT is to screen out unqualified disks, including welding problems, particle problems, DRAM and main control problems. Passing the RDT test can ensure that the disks are in use during use Stable and reliable.
| 1. SSD RDT aging test chamber |
| The specific configuration is as follows: |
| 1. Inner dimensions of oven |
W1200×D350×H1200mm. |
| 2. SSD RDT aging test chamber dimensions |
(The actual object shall prevail) |
| 3. The box shell is made of δ1.5mm cold-rolled steel plate and is reinforced by bending and forming. |
| 4. The inner liner and interlayer of the box are made of δ1.2mm galvanized steel plate by bending and forming. |
| 5. The insulation layer of the box is filled with high-quality rock wool, with a thickness of 50mm. |
| 6. The oven is equipped with double doors, and an observation window is designed on the door. It is equipped with a double-layer configuration of 8mm tempered glass and the size is about W350×H1000mm. |
| 7. The bottom of the oven is equipped with an adjusting foot cup, one of which is equipped with 4 universal wheels. |
| 8. There is an adjustable exhaust gas outlet on the top of the oven. |
| 9. The oven circulates air using a Taiwan-made 1/2HP vertical motor and is equipped with a 9-inch reinforced multi-wing air fan.
Wheel, designed to transport wind up and down.
|
| 10. The oven heating system uses high-quality stainless steel heating pipes with radiators, and the power is about 3.6KW. |
| 11. The oven heating temperature is adjustable from room temperature to 80°C. |
| 12. The oven temperature control adopts RKC digital display intelligent thermostat, and the over-temperature protection adopts mechanical thermostat.controller configuration. |
| 13. The electrical box is designed with secondary temperature control, power indication, fault indication, time controller, andSet up over-temperature timeout audible alarm and automatic power-off control functions. |
| 14. The circuit board, power supply and screws for fixing the circuit board that need to be installed in the aging box shall be provided by the purchaser.The supplier is responsible for installation and wiring. |
| 15. After professional anti-rust treatment, the surface of the oven is treated with computer color oil paint. |
1.Q :How to provide after-sales service?
A:If customers need our engineers to come to the site for service, we will send out engineers to provide repair service for you.
2.Q: Can we visit and study in your factory?
A: Welcome to visit and study in our factory, we will show you our R&D and production capacity.
3.Q :Can I install and commission the calibration equipment on site?
A: Yes, we can send technicians and engineers to the customer's site for installation, commissioning and calibration.
4.Q: What are the transportation methods?
A :Air freight, sea freight, railroad transportation, all transportation methods according to the customer's needs.
5.Q : What are the packing methods?
A: Standard export wooden box packaging, solid and firm.
6.Q :How do you calibrate the equipment?
A: We have our own calibration and third-party calibration.
7.Q :What are the payment methods?
A :The payment methods are T/T, CIF, Paypal, L/C, VISA and so on.
8.Q :How long is the warranty period?
A :Warranty is 1 year, lifetime free service.
9.Q :What is the delivery time for your company's products?
A :This depends on the actual product you order, usually at least 30 days.
){kind=link}