| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Material: | Stainless Steel |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
This equipment can be used for high temperature, low temperature, high and low temperature cycle tests, as well as constant damp heat and alternating damp heat tests on new energy auto components, and can be seamlessly connected with the vibration table, which can realize the three factors of temperature-humidity-vibration comprehensive test.
Advantages :
•Provides virtual space to simulate the real environment, product inspection, and verification of R&D results for batteries, aerospace, aviation, electronics, automotive and other products and test institutes such as quality inspection institutes, research institutes, colleges and universities. The test chamber is a great assistant to shorten the development cycle and to improve product quality and reliability.
•The observation window is made by tempered glass with a layer of explosion-proof film to prevent the impact of battery explosion.
•An independent over-temperature protection controller is used for over-temperature protection, which can ensure that when an explosion with a pressure less than 0.14 MPa occurs, people and objects five meters away from the environmental chamber are not damaged, but it may cause damage to the environmental chamber.
Professional vibration system installation ensures high isolation of air and temperature, as well as high transmission of mechanical property.
GB10589 Technical Conditions for Wet and Heat Test Box
GB/T2423.10-1995 Vibration (sinusoidal)
GB10592 High and Low Temperature Wet Test Box Technical Conditions
GJB150.3-86 High Temperature Test
GB2433.1-1989 Low Temperature Test Method
GJB150.4-86 Low Temperature Test
GB2423.2-1989 High Temperature Test Method
GJB150.9-86 Hygrothermal Test
GB/T2423.4-1993 Alternating humidity and heat test method
GJB150.19-86 Vibration Test
|
Model |
HTHV408 |
HTHV1000 |
|
Test Space Volume(L) |
408 |
1000 |
|
Interior dimensions (cm) |
60*85*80 |
100*100*100 |
|
Temp. range |
-70ºC~150ºC |
|
|
Temp. fluctuation |
≤0.5ºC |
|
|
Humidity range |
20%~98%RH |
|
|
Humidity uniformity |
±2.0ºC |
|
|
Humidity fluctuation |
≤2.5%RH |
|
|
Humidity deviation |
>75%RH, ±3.0%;≤75%RH, ±5.0% |
|
|
Temp rise and drop |
1ºC/min~15ºC/min |
|
|
Interior material |
Stainless steel SUS 304 |
|
|
Exterior material |
Rust proof cool rolled steel plate with surface coating |
|
|
Insulation material |
Hard PUR foam plastic |
|
|
Refrigerator |
Original imported Fully hermetic/ semi-hermetic compressor |
|
|
Cooling mode |
Water cooled |
|
|
Heater |
Quality nickel-chromium alloy heaters |
|
|
Blower |
Centrifugal blower |
|
|
Door window |
470mm*350mmelectric film painted hollow glasses |
|
|
Humidifier |
Water tray humidifier |
|
|
Temp sensor |
PT100 Platinum resistance sensor |
|
|
Controller |
Touch screen programmable controller |
|
|
Power |
AC 380V/50HZ |
|
|
Vibration table |
Optional according to customer's requirement |
|
|
Safety device |
Over temperature protection, compressor lack of oil, over pressure, cut-current, overload protection, lack of water protection, ventilator overload protection |
|
|
Standard configuration |
Observation window, testing hole, sample shelve, temperature resistance light |
|
|
Select accessories |
Specialized testing hole, Specialized sample shelve, extra sample holder |
|
|
Ambient Temp. |
5ºC~35ºC |
|
|
Temp. adjustment method |
BTHC mode |
|
){kind=link}