30cubic Meter Purifier Cadr Test Chamber/Air Filter Test Machine/Environmental Test Chamber (Glass) Cleanroom

• Customization: Available
• After-sales Service: 1 Year
• Power Supply: AC380V
• Model NO.: HYQW-30
• Certification: CE, TUV, ISO
• Warranty: 1 Year
• Temperature and Humidity Range: 10ºC~+60ºC,40~70%Rh
• Evenness: Temperature≤2ºC; (No Load).
• Volatility: Temperature≤±0.5ºC
• Instrument Display Accuracy: Temperature: 0.1ºC Humidity: 0.1rh
• Ventilation Rate: 1~50 Times/H
• Transport Package: Standard Export Wooden Box
• Specification: Customized
• Trademark: HUANYI
• Origin: China
• HS Code: 8479899990
• Production Capacity: 10000pieces/Year

Product Description

Product Description

Category: Air purifier, fresh air performance test series

Product introduction: This product is a 30M large environmental test chamber. The inner wall is made of 10M float glass, and the sealing material is a special sealant with low adsorption. The air purification system in the cabin is equipped with a multi-functional air filter that can remove both particulate matter and chemical pollutants such as formaldehyde and gas. Moreover, the cabin has precise temperature and humidity control, good air tightness, and low background concentration in the cabin.
 

Application fields

It mainly detects the purification efficiency tests of air purifiers such as hanging machines, cabinet machines, vehicle-mounted machines, and air duct machines to see whether the test performance meets the standards.

Mainly test the purification efficiency tests of air purifiers on-hook, cabinet, vehicle-mounted, and air duct machines to see if the test performance meets the standard.

 

Meet the standards

GB/18801-2015 air purifier

GB/18803-2002 indoor air quality standards

GB 21551.3-2010 Antibacterial, sterilizing and purifying functions of household and similar electrical appliances - Special requirements for air purifiers

IEC 62301: 2005 Measurement of standby power of household appliances

EPA Energy star U.S. Environmental Protection Agency Energy Star

GB 4706.45 Safety of household and similar electrical appliances. Special requirements for air purifiers
 

Product Parameters

 

Serial number	Project	Content
A	Internal dimensions of environmental test chamber	3400D×3500W×2500Hmm,30m3.
	Chamber dimensions	Box part:3600D×3700W×2950Hmm. Crew section:800D×700W×1500Hmm.
	Door	Gate width0.8W*2.0H(Meter)
B	Temperature and humidity range	10ºC~+60ºC,40~70%RH.
	Evenness	Temperature≤2ºC; (no load).
	Volatility	Temperature≤±0.5ºC.
	Instrument display accuracy	Temperature: 0.1ºC Humidity: 0.1RH.
C	Ventilation rate	1~50 times/h.
D	Total installed capacity of equipment	1) Installation power: about 23kw 2) Actual operating power: related to the ambient  temperature and ventilation. Preparation stage: about 18kw.    Constant stage: about 12kw. Evacuation stage: about 5kw.
E	Equipment noise	≤75dBA(1m away from the device)
Equipment use conditions:
Serial number	Project
A	Ambient temperature:-10ºC~+35ºC, Relative humidity:20~80 RH
B	Ambient air background concentration:Formaldehyde less than 10μg/m3,
C	There should be no high concentration dust, corrosive gas and flammable and explosive atmosphere around.
D	Power supply: AC 380V±10 50Hz±5, three-phase five-wire system, grounding resistance ≤4 (Ω), meeting the  requirements of the installed capacity of the equipment.
Chamber structure:
Serial number	Project	Content
A	Test chamber	1.The wall made of stainless steel square pass as reinforcement and 10mm float glass 2.Floor (pre-embedded power/ground line), 1.0mm thick SUS304 stainless steel; top ceiling  1.0mm thick SUS304 stainless steel. 3.Ground bearing ≥500Kg/m2. 4.4 sets of 60W moisture-proof and explosion-proof lighting fixtures are installed in the environmental test chamber. 5.Corrosion-proof and explosion-proof power sockets need to be reserved. 6.An independent on-site mechanical pressure gauge (with an alarm device) shall be installed in the chamber. 7.There are 2 internal explosion-proof and anti-corrosion power sockets, the strong and weak electricity are separated, and the strong electricity is 20-30cm away from the bottom of the chamber. 8.The end face seal of the fan side shaft of the circulating fan adopts imported sealed bearings. 9.The chamber is provided with a pressure balance port.
B	Chamber door	1. 1 fan door, the size of the door opening is 2000Hx800Wmm. The sealing adopts tetraethylene strip + sealing strip (HBC1079 food-grade sealant, which has passed the EU ROHS environmental protection standard, through the EU  REACH chemical regulations and standards, through the US FDA food hygiene standards). 2. The hinge can ensure the door opening angle ≥ 120 degrees.

Company Profile

FAQ

 

1.Q :How to provide after-sales service?
A:If customers need our engineers to come to the site for service, we will send out engineers to provide repair service for you.

2.Q: Can we visit and study in your factory?
A: Welcome to visit and study in our factory, we will show you our R&D and production capacity.

3.Q :Can I install and commission the calibration equipment on site?
A: Yes, we can send technicians and engineers to the customer's site for installation, commissioning and calibration.

4.Q: What are the transportation methods?
A :Air freight, sea freight, railroad transportation, all transportation methods according to the customer's needs.

5.Q : What are the packing methods?
A: Standard export wooden box packaging, solid and firm.

6.Q :How do you calibrate the equipment?
A: We have our own calibration and third-party calibration.

7.Q :What are the payment methods?
A :The payment methods are T/T, CIF, Paypal, L/C, VISA and so on.

8.Q :How long is the warranty period?
A :Warranty is 1 year, lifetime free service.

9.Q :What is the delivery time for your company's products?
A :This depends on the actual product you order, usually at least 30 days.