| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
This machine consists of concave surface non-jawed pliers, bottom fabric pliers and lmada push-pull force gauge. Button parts are held in place by the concave five-jawed pliers and clothing is held in place by the bottom fabric pliers. By rotating the upper speed wheel, the user can apply a fixed force and record the fixed or breaking strength. Using the jaws and attachments, the instrument can also test other fine buttons, denim buttons, four-hole buttons, and clothing accessories such as zippers, bow ties, appliques, hanging hooks, D-rings, and more.
ASTM D7142-2/F963,16 CFR 1500,EN 71 PART1,GB 6675,ISO 8124,M&P P115A
Tests the fixing strength of buttons and buttons and various garment accessories, etc. Characterized in the design and manufacture of baby and children's clothing items. If a button becomes detached from the garment, it can create a choking hazard for infants who may swallow it. This test program limits the responsibility of garment manufacturers to ensure that buttons, buttons and other accessories are properly fastened to garments.
Fabric with button fasteners attached should be placed on the bottom fabric clamp anvil and make sure the fabric is compacted after pulling down on the push bar. Then clamp the button tightly with the concave five-jawed button pliers, apply a pulling force of 17 pounds (approximately 7.73 kilograms) vertically, wait 10 seconds, and then relax. If the button makes it through the entire test without being ripped off, the button is considered secure. A minimum of twenty buttons are tested at a time, and both the concave and convex parts of the button are tested for strength.
1. Ensure that the tension is vertically aligned; and
2. Fix the edge of the button without affecting its adhesion.
3. Apply consistent force continuously for 10s.
4. Can be raised upward and fixed the position of the test table through the handle, convenient to replace the specimen.
5. Horizontal first wheel operation, designed with ergonomic principles, making the operator more comfortable.
6. Safe design locking buckle, operation is more safe and reliable.
7. With the special long frame, it can extend the test range more widely.
8. Hidden spring design, greatly improve the pin tightening strength and ensure the test repeatability.
9. Can reduce the damage caused by the specimen slipping and leaking in the testing process.
10. Simple design, accurate test results
){kind=link}