Battery Temperature Test Chamber for PCB

• After-sales Service: Remote Control
• Warranty: 1 Year
• Application: Industry, School, Hospital, Lab
• Customized: Customized
• Certification: CE, ISO, RoHS
• Structure: Console Mode
• Model NO.: HY-TH
• Material: Stainless Steel
• Volume: 660L
• Temperature Range: -70+170 Degrees
• Temperature Deviation: 1.0 Degree
• Temperature Fluctuation: 0.5 Degrees
• Equipment Weight: About 450kg
• Transport Package: Wooden Packing
• Specification: 1000*1000*1000mm
• Trademark: HUANYI
• Origin: China
• HS Code: 8419899090
• Production Capacity: 1000/Month

Product Description

Application

     Battery temperature chamber use:Used for battery testing and ring instrument test system and other battery products of constant temperature testing. Is a university, scientific research institutions and high-tech enterprises to carry out energy saving and environmental protection, high-performance battery testing and operating projects of the test equipment. Used to ensure that the battery in the test current, voltage and other parameters of the strict environment: no vibration, dry low humidity, constant temperature test. The emergence of battery temperature chamber, with better environmental control, to solve the battery test of harsh test conditions, has been widely used.

Meet the standards

GB5170, 2, 5-2008 "Electrical and electronic products environmental test equipment basic parameters verification method low temperature, high temperature, constant damp heat, alternating damp heat test equipment" requirements;

Basic environmental test procedures for electric and electronic products Test A: Low temperature test method GB 2423.1-2008
Basic environmental test procedures for electric and electronic products Test B: High temperature test method GB 2423.2-2008
Basic environmental test procedures for electric and electronic products Test Ca: Constant damp heat test method GB/T 2423.3-2008
Basic environmental test procedures for electric and electronic products Test Db: Alternating damp heat test method GB/T423.4-2008
Basic environmental test procedures for electric and electronic products Test N Temperature test method GB/T 2423.22-2002
GB/T 5170.2-2008 "Temperature test equipment";
GB/T 5170.5-2008 "Damp heat test equipment";
GB/T 10592-2008 "Technical conditions for high and low temperature test chambers";
GB/T 10589-2008 "Technical conditions for low temperature test chambers";
GB/T 10586-2006 "Technical Conditions for Damp Heat Test Chamber"

Product Parameters

 

Main technical indicator
chamber body:
1, studio size		W 500× H 600 × D 500 mm
2, the size		W 800×H 1700× D 1500 mm(subject to the actual product)
Temperature:
1, temperature range		-40ºC ~ +150ºC
2, temperature deviation		≤±2.0ºC (no load)
3. Temperature fluctuation		≤±0.5ºC(no load)
4, temperature uniformity		≤±2.0ºC
5, the temperature rise and fall rate		(RT~100ºC),≤30min,(no load) (RT~-40ºC),≤60min,(no load)
4,body structure
Internal material	Internal material stainless steel sheet (SUS_1.0mm thick)
Material of Outer chamber	Plastic Spraying
Insulation Material:	Hard Polyurethane Foam and Glass Cotton
4,Humidifier	Ceramic Stainless Steel Electric Heater
5,Humidifier	UL heater
6, gate	Single door, single window, left open, right hand Window 210x270x35mm 3-layer vacuum layer Planar embedded handle c.rear button: SUS #304 d.lamp PL lamp 13W
7,Observation window	Defrost line
8,Threading hole	The diameter in the middle of the box body is 50 mm. Three lead holes on the left are equipped with rubber isolation plug and hole cover.;
9,Lighting installations	Install LED lights ahead.
5,Air conditioning system
1, control mode	Forced circulation ventilation
2,Air conditioner	Full orifice top air supply,Ensure the uniformity of temperature and humidity in the test box to reach the standard.;
3,heating	High quality nickel-chromium wire electric heater, non-contact control mode (SRR);
4,cooling	Copper tube sinusoidal corrugated aluminium fin air heat exchanger
5,Humidification	Steam plus

 

FAQ

1.Q :How to provide after-sales service?
A:If customers need our engineers to come to the site for service, we will send out engineers to provide repair service for you.

2.Q: Can we visit and study in your factory?
A: Welcome to visit and study in our factory, we will show you our R&D and production capacity.

3.Q :Can I install and commission the calibration equipment on site?
A: Yes, we can send technicians and engineers to the customer's site for installation, commissioning and calibration.

4.Q: What are the transportation methods?
A :Air freight, sea freight, railroad transportation, all transportation methods according to the customer's needs.

5.Q : What are the packing methods?
A: Standard export wooden box packaging, solid and firm.

6.Q :How do you calibrate the equipment?
A: We have our own calibration and third-party calibration.

7.Q :What are the payment methods?
A :The payment methods are T/T, CIF, Paypal, L/C, VISA and so on.

8.Q :How long is the warranty period?
A :Warranty is 1 year, lifetime free service.

9.Q :What is the delivery time for your company's products?
A :This depends on the actual product you order, usually at least 30 days.