Rapid-Rate Thermal Cycle Chamber is used for cold resistance test of electrical and electronic products and parts, adaptability test under the condition of rapid temperature change or gradual change. It is especially suitable for ESS test of metal and plastic, rubber, electronic and other material, can be used as the basis of product improvement or reference.
The humidity range from 10% to 95% is optional. It meet MIL-STD,IEC,JEDEC and other international test performance standards.
The rapid temperature cycle test chamber (also known as the rapid temperature change test chamber) is a product that uses temperature acceleration techniques (when cycling within the upper and lower extreme temperatures, the product produces alternate expansion and contraction) to change the external appearance of the product at the design strength limit. Environmental stress causes thermal stress and strain in the product. Through accelerated stress, potential defects in the product will emerge [potential part material defects, process defects, and workmanship defects] to prevent the product from being exposed to environmental stress during use. The test sometimes leads to failure and unnecessary losses. It has a significant effect on improving product shipment yield and reducing the number of repairs. In addition, the stress screen itself is a process in the manufacturing stage, not a reliability test, so Stress screening is a procedure performed on 100% of the products
1. IEC60068-2-1:2007 (GB/T2423.1-2008) Environmental testing - Part 2: Test methods - Tests A: Cold
2. IEC60068-2-2:2007 (GB/T2423.2-2008) Environmental testing for electric and electronic products Test methods - Tests B:Dry Heat
3. IEC 60068-2-14 2009 Environmental testing - Part 2-14: Tests -Test N: Change of temperature
4. GB/T5170.2-2008 Inspection methods for environmental testing equipment for electric and electronic products-Temperature testing equipment
5. GB/T2423.22 Environmental testing for electric and electronic products-Part 2:Test methods-Test N:Change of temperature
This product is suitable for safety performance testing of electronic components and provides reliability testing, product screening testing, etc. At the same time, through this equipment testing, product reliability and product quality control can be improved. The high and low temperature impact test chamber is a necessary test equipment in the fields of aviation, automobiles, home appliances, scientific research and other fields. It is used to assess and determine the parameters and performance of electrical, electronic, automotive electrical appliances, materials and other products after the temperature environment shock changes in high and low temperature tests. , adaptability of use, suitable for schools, factories, miy industry, research institutes, and other units.
Controller features
1. It adopts an imported 7-inch true color touch screen with intuitive screen display and easy operation. It can be set value and program controlled, and the human-machine interface is friendly and interactive.
2. Schedule power on and off functions, end planning settings, automatically save data curves during power outages, etc.
3. Standard USB/RS-232 interface, test data curve download, data copy computer automatically generates excel table format, convenient for analysis.
4. The rapid temperature change test chamber can be purchased with optional LAN remote control function.
Technological innovation
1. A single test chamber can conduct multiple tests: rapid temperature change (stress screening), high and low temperature cycles, high temperature and high humidity, heat and humidity cycles, condensation test...etc.
2. Independently developed control system, with Chinese and English screen language switching function, using the latest fuzzy algorithm technology, and energy saving of control equipment up to 30%.
3. The test curve will not be interrupted when the machine is powered on again, and the technology will keep running at low temperature for 1000H without frost.
4. The water circuit distribution board of the rapid temperature change test chamber is separated to reduce the safety hazards caused by water circuit failure to electrical appliances.
5. It has strong ability to prevent static electricity and reduce consumption, reaching the best performance in the same industry.
Technical Parameters
| Model |
HYQT-80 |
HYQT-150 |
HYQT-225 |
HYQT-408 |
HYQT-1000 |
| Interior WxDxH(cm) |
40x40x50 |
50x50x60 |
50x60x75 |
80x60x85 |
100x100x100 |
| Max.specimen load |
5 kg |
10kg |
12kg |
20kg |
65kg |
| Cooling speed |
Optional SL5: 5°C/min ; SL10:10°C/ min; SL15: 15°C / min |
| Temp. range |
-70ºC~150°C |
| Temp. fluctuation |
±0. 5°C |
| Temp. uniformity |
≤2. 0°C |
| Temp. deviation |
±2. 0°C |
| Exterior material |
Rust proof cool rolled steel plate with surface coating or SUS304 stainless steel |
| Interior material |
SUS304 stainless steel |
| Insulation material |
Rigid polyurethane Foam |
| Refrigeration mode |
Mechanical compression cascade refrigeration |
| Refrigerator |
Original imported compressor(TECUMSEH) |
| Refrigerant |
R404A/R23 |
| Cooling mode |
Water cooled |
| Heather |
Quality nickel-chromium alloy heaters |
| Blower |
Centrifugal Blower |
| Door window(mm) |
Glass incorporating heat generator |
| Temp. sensor |
PT100 Platinum resistance sensor |
| Controller |
Touch screen programmable controller with English menu |
| Power |
3 phase AC 380V±10% 50Hz |
1.Q :How to provide after-sales service?
A:If customers need our engineers to come to the site for service, we will send out engineers to provide repair service for you.
2.Q: Can we visit and study in your factory?
A: Welcome to visit and study in our factory, we will show you our R&D and production capacity.
3.Q :Can I install and commission the calibration equipment on site?
A: Yes, we can send technicians and engineers to the customer's site for installation, commissioning and calibration.
4.Q: What are the transportation methods?
A :Air freight, sea freight, railroad transportation, all transportation methods according to the customer's needs.
5.Q : What are the packing methods?
A: Standard export wooden box packaging, solid and firm.
6.Q :How do you calibrate the equipment?
A: We have our own calibration and third-party calibration.
7.Q :What are the payment methods?
A :The payment methods are T/T, CIF, Paypal, L/C, VISA and so on.
8.Q :How long is the warranty period?
A :Warranty is 1 year, lifetime free service.
9.Q :What is the delivery time for your company's products?
A :This depends on the actual product you order, usually at least 30 days.
){kind=link}