High Low Temperature Humidity Environment Climate Test Chamber,Climate Test chamber are widely used in testing various types of materials for their tolerances of heat, cold, dry and humidity.
It is applicable for quality inspection for all types of electronic products, electric appliance, and products from communication ,instruction , automobile, plastic, metal, food, chemical, building materials, medical and aerospace industries.
Equipment summary:
Temperature Humidity Environmental Test Equipment is applied to test the materials in heat-resistance, cold-resistance,
dry-resistance, moisture-resistance. It is simple to operate and program easy to edit. It can show the set values and operative time.
Test chamber applications:
1. To simulate test environment with different temperature and humidity
2. Cyclic test includes climatic conditions: holding test, cooling-off test, heating-up test, moistening test and drying test…
3. Cable port with flexible silicone plug for cable routing to provide the condition of test unit under operation
4. Uncover test unit weakness in a short-term test with accelerated time effect
Function:
1. To simulate test environment with different temperature and humidity
2. Cyclic test includes climatic conditions: holding test, cooling-off test, heating-up test, moistening test and drying test…
3. Cable port with flexible silicone plug for cable routing to provide the condition of test unit under operation
4. Uncover test unit weakness in a short-term test with accelerated time effect
Design Features
1. High performance and quiet operation (68 dBA)
2. Space-saving designed for flush installation to wall
3. Full thermal break around doorframe
4. One 50mm diameter cable port o left, with flexible silicone plug
5. Accurate wet/dry-bulb humidity measurement system for easy maintain
Test chamber design features:
1. High performance and quiet operation (68 dBA)
2. Space-saving designed for flush installation to wall
3. Full thermal break around doorframe
4. One 50mm diameter cable port o left, with flexible silicone plug
5. Accurate wet/dry-bulb humidity measurement system for easy maintain
Test chamber programmable controller:
1. PLC controller for test chamber
2. Step types include: ramp, soak, jump, auto-start, and end
3. RS-232 interface to connect computer for output
Meet the standard:
IEC60068-2-1 : Cold
IEC60068-2-2 : Dry heat
IEC60068-2-14 : Change of temperature with specified rate of change
IEC60068-30 : Damper heat, cyclic (Rapid-Rate Temperature Cycle Type)
IEC60068-2-38 : Composite temperature/ humidity cyclic test
IEC60068-2-78 : Damp heat, steady state
IEC61747(5.2.7) : Liquid crystal and solid-state display devices Environmental, endurance and mechanical test (Rapid-Rate Temperature Cycle Type)
ISO16750-4 5.3 : Road vehicles (temperature cycling)
| Model |
HYH-80 |
HYH-150 |
HYH-225 |
HYH-408 |
HYH-800 |
HYH-1000 |
| Inner Size(cm) |
40*50 *40 |
50*60*50 |
50*75*60 |
60*85*80 |
100*100*80 |
100*100*100 |
| Outer Size(cm) |
60*159*137 |
70*167*150 |
70*172*160 |
80*176*171 |
120*195*175 |
148*195*175 |
| Weight(kg) |
160kg |
220kg |
300kg |
550kg |
960kg |
1100kg |
| Temp.control method |
PID temperature humdity balance control |
| Temp.Range |
ModelA:0ºC ~150ºC Model B:-20ºC ~150ºC;
Model C:-40ºC ~150ºC Model D:-70ºC ~150ºC |
| Humid.Range |
20%~98%RH |
| Temp.Uniformity |
±2ºC |
| Temp.Fluctuation |
±0.5ºC |
| Humid.Uniformity |
±3%R·H |
| Heating Rate |
≥3ºC/min |
| Cooling Rate |
≥1~1.5ºC/min |
| Cooling Method |
Air cooling |
| Use ambient temperature |
+5°C~+35°C |
| Protective device |
Leakage protection, compressor overpressure, overheating protection, overcurrent protection, overtemperature protection, fan overload protection, phase sequence protection, dry burning and air burning protection, water shortage protection |
| Standard accessories |
1 insulated glass window, 1 test hole (100mm or 50mm), 2 sets of sample holders, 1 lighting lamp, USB interface |
| Power supply |
AC 220V / AC 380V=10% 50HZ three-phase five-wire |
){kind=link}