Voc Pretreatment Chamber for Plastic Runway Voc Pre-Treatment Laboratory Test Chamber for Wood-Based Panel

• After-sales Service: 1 Year
• Power Supply: AC 380V
• Certification: CE, TUV, ISO
• Warranty: 1 Year
• Volume Inside The Box (D*W*H): 2 Cabins (Can Be Customized)
• Temperature Range Inside The Box: (15~30)°c (Temperature Deviation +1°c)
• Power: Rated Power: 5kw, Operating Power: 3kw
• Dimensions: W2100xd1100xh1800)mm
• Static Leakage Rate: Under 1kpa Relative Pressure, Leakage Rate <0.2X10
• Noise: 65dB
• Transport Package: Strong Wooden Case
• Specification: Customized
• Trademark: HUANYI
• Origin: China
• HS Code: 8514199000
• Production Capacity: 10000pieces/Year

Product Description

Product Description

VOC Pretreatment Chamber

Pretreatment chamber can provide standard temperature and humidity VOC clean environment. After testing material temperature, humidity, pressure and VOC release balance, the pollutant release rate and release characteristics of materials and products can be tested.

Pretreatment principle:

The materials and products or their samples are placed in the pretreatment room, and the environmental conditions such as temperature, relative humidity, wind speed, pressure and indoor VOC cleaning conditions are adjusted to make the samples reach the same temperature and humidity in the balance room, and the release quantity and release rate of the samples reach the balance. At the same time, the cross-contamination of samples (the cross-contamination from TVOC and the cross-contamination of one-component voc) must be avoided.

 Usage: 

Plastic surface layer, VOC test in runway; 

Formaldehyde and VOC release test in wood products and building decoration materials; 

Research on pollutant release amount in materials; 

Environmental labeling product certification use.

 

Meet the standards

DIN EN 16516 WAS ADOPTED AS FORMALDEHYDE TESTING ON WOOD-BASED MATERIALS

ISO 16000-9:2006 Indoor air - Part 9: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test chamber method

EN 717-1 Environmental box method for formaldehyde emission measurement of wood-based panels

ASTM D6007-02 Standard Test Method for Determining Formaldehyde Concentration in Wood

Products Released Gases by Small Scale Environment Chamber

ASTM D5116-06 Standard Guide For Small-Scale Environmental Chamber Determinations Of Organic

Emissions From Indoor Materials/Products

GB18580-2017 Formaldehyde emission limits in wood-based panels and their products for interior decoration

GB17657-2013 Experimental method for physical and chemical properties of wood-based panels and

veneered wood-based panels
 

Manufacturer	HUANY INSTRUMENTS
Volume inside the box (D*W*H)	700mmx400mmx600mm 4 cabins (can be customized)
Temperature range inside the box	(15~30)°C (temperature deviation +1°C)
Humidity range inside the box	(30~80)%R.H. (Adjustment accuracy: +5%R.H)
Air replacement rate	(0.2-2.0) times/hour (accuracy 0.05 times/H)
Air flow rate	(0.1~1.0)Ms (continuously adjustable)
Background concentration control	Formaldehyde concentration <0.1mg/m³
Power supply	220V 16A 50HZ

Power	Rated power: 5KW, operating power: 3KW
Dimensions	W2100xD1100xH1800)MM
Static leakage rate	Under 1KPa relative pressure, leakage rate <0.2x10-3m3/min
Noise	65dB

Company Information