All equipment required for testing: nozzles, salt water buckets, specimen holders, spray liquid
Collection vessels, test chambers, brine, supply tanks, pressure tanks,
The supply equipment and exhaust equipment required for compressed air are as shown in the figure and the test is as follows.
1. The material is required to be blunt and the material itself cannot be corroded and cannot affect the corrosion test.
2. The atomizing nozzle cannot spray the test liquid directly onto the sample, and the solution at the top of the spray chamber cannot drip on the test piece.
3. The test liquid dripping from the specimen cannot flow back into the salt bucket for testing.
4. The solution cannot contain grease and dust, so an air purifier must be prepared.
5. The spray liquid should be collected for at least 16 hours, and an average of 2ml to 1ml of solution can be collected per hour. Use the final average to represent the spray volume.
6. The concentration of sodium chloride solution should be maintained at 40~60g/L.
7. The temperature of the pressure barrel should be maintained at 47±1 degrees, and the temperature of the brine barrel should be maintained at 35±1 degrees.
Sample placement:
1. If multiple workpieces need to be tested, please ensure that each major surface can be detected by salt spray at the same time.
2. When the samples are arranged, the spray should be able to drip freely on all test pieces to prevent the spray from being blocked.
3. Each sample cannot come into contact with each other.
4. Salt spray cannot drip from one test piece to another.
5. The bottom of the test piece should be marked with a sample identification mark.
Precision salt spray test chambers are widely used in aerospace, electronics, electrical appliances, communications, medical pharmaceuticals, colleges and universities, scientific research units and other industries to conduct environmental machine reliability tests on product appearance, temperature and humidity resistance, etc.
| Model project |
HY-SST-120 |
HY-SST-100 |
HY-SST-90 |
HY-SST-70 |
HY-SST-60 |
Internal dimensions (length ×width ×height)
centimeter |
120×100×50 |
100×70×50 |
90×60×40 |
70×50×40 |
60×45×40 |
| Laboratory temperature |
NSSACSS35ºC±1ºC/CASS50ºC±1ºC |
| Pressure barrel temperature |
NSSACSS47ºC±1ºC/CASS63ºC±1ºC |
| Power |
AC220V1¢45A |
AC220V1¢35A |
AC220V1¢30A |
AC220V1¢25A |
AC220V1¢20A |
| Laboratory volume |
600L |
350L |
270L |
140L |
108L |
| Salt bucket volume |
40L |
32L |
25L |
20L |
15L |
| Related Standard |
ASTM B117 |
| Controls |
Touch screen (HMI) |
| Capacities |
450 Liters or more |
| Material of Construction |
SS316L or better |
| Chamber Temperature |
Ambient to 45°C |
| Test Chamber Temperature |
35°C ± 2°C |
| Chamber Temperature Least Count |
0.1°C or better |
| Chamber Temperature Repeatability |
±2°C or better |
| Air Saturator Temperature |
Ambient to 45°C |
| Air Saturator Temperature Least Count |
0.1°C or better |
| Air Saturator Temperature Repeatability |
±2°C or better |
| pH value of Salt Solution |
6.5 to 7.2 pH |
| Temperature Control |
Inbuilt PID Temperature Controller |
| Timer |
Up to 99999 Hours |
| Test Air Pressure |
0.7 &1.2 Kg/cm2 |
| Air Regulator |
0 To 40 psi |
| Air Purging Facility |
Available |
| Fog Collector |
Available inside the chamber |
| Fog Collection |
1-2ml per 80 cm² per hour or better |
| Measuring Cylinder (External) |
Available (Capacity:50ml or more) |
| Reservoir Tank for Solution (capacity) |
100 Liters or more |
| USB Port |
Available, to transfer data using Pen Drive |
1.Q :How to provide after-sales service?
A:If customers need our engineers to come to the site for service, we will send out engineers to provide repair service for you.
2.Q: Can we visit and study in your factory?
A: Welcome to visit and study in our factory, we will show you our R&D and production capacity.
3.Q :Can I install and commission the calibration equipment on site?
A: Yes, we can send technicians and engineers to the customer's site for installation, commissioning and calibration.
4.Q: What are the transportation methods?
A :Air freight, sea freight, railroad transportation, all transportation methods according to the customer's needs.
5.Q : What are the packing methods?
A: Standard export wooden box packaging, solid and firm.
6.Q :How do you calibrate the equipment?
A: We have our own calibration and third-party calibration.
7.Q :What are the payment methods?
A :The payment methods are T/T, CIF, Paypal, L/C, VISA and so on.
8.Q :How long is the warranty period?
A :Warranty is 1 year, lifetime free service.
9.Q :What is the delivery time for your company's products?
A :This depends on the actual product you order, usually at least 30 days.
){kind=link}