High and Low Temperature Cycling Thermal Shock Test Chamber

• Customization: Available
• After-sales Service: 1 Year
• Power Supply: AC 380V 50Hz
• Model NO.: HYTS-252
• Certification: CE, TUV, ISO
• Warranty: 1 Year
• Hot Zone Temp. Range: +80ºC~+200ºC
• Cold Zone Temp Range: -10ºC~-70ºC
• Test Zone Temp. Range: -60ºC~+150ºC
• Temp. Fluctuation: ±2ºC
• Temp. Recovery Time: <5min
• Exterior Material: Painted Steel
• Internal Tank: Stainless Steel Plant #304
• Transport Package: Standard Export Wooden Box
• Specification: Customized
• Trademark: HUANYI
• Origin: China
• HS Code: 8514199000
• Production Capacity: 10000pieces/Year

Product Description

Product Description

Thermal shock chambers perform tailored environmental stress screening of component and board electronic assemblies. Thermal shock test chambers is used to detect the chemical changes or physical damage caused by thermal expansion and contraction of the sample in the shortest time. Thermal shock is divided into air to air type thermal shock and liquid to liquid thermal shock. Compared with liquid to liquid thermal shock chambers, air to air type thermal shock test chambers are more popular. 

Air type thermal shock test chambers can be divided into three-zone type and two-zone type thermal shock tester according to test requirements and test standards. The difference lies in the test method and internal structure. Three-zone type thermal shock chambers are divided into a cold storage room, a heat storage room and a test room.

3 Zone: Three zone Thermal Shock Test Chamber utilizes controlled areas for hot, ambient and cold temperatures. The product is moved from ambient to hot or ambient to cold zones. The chamber can be programmed to include a dwell period in the ambient zone if desired.

Features

Features of Three Zones Thermal Shock Chamber:

 Programmable LCD touch screen temperature controller, support multiple languages.

Test area can be separately tested for low temperature or high temperature.

Temperature recovery time: 3~5 min.
 

Meet the standards

GB/T2423.1-2008 Environmental Testing Part 2: Test Methods Test A: Cold State

GB/T2423.2-2008 Environmental Testing Part 2: Test Methods Test B: Dry Heat

GB/T2423.22-2002 Environmental Testing for Electrical and Electronic Products Part 2: Test Methods Test N: Temperature Change

Product Parameters

 

Model	HYTS-50	HYTS-80	HYTS-108	HYTS-216	HYTS-252
Test zone size (W×H×D)	36×35×40	50×40×40	60×40×45	60×60×60	70×60×60
External chamber size (W×H×D)	120×182×150	143×195×160	151×185×185	151×205×200	151×215×200
Hot zone temp. range	+80ºC~+200ºC
Cold zone temp range	-10ºC~-40ºC,-10ºC~-60ºC,-10ºC~-70ºC
Test zone temp. range	-40ºC~+150ºC,-55ºC~+150ºC,-60ºC~+150ºC
Temp. fluctuation	±2ºC
Temp. recovery time	<5min
Exterior material	Painted steel
Internal tank	Stainless steel plant #304
Insulation	PU+Fiberglass  wool
Heating system	Stainless steel high temp. heater
Cooling system	Compressor + Finned evaporator + Air(Water) cooled condenser
Controller	Touch LCD ++ SSR + PID
Accessories	Power test hole (50mm)
	Control status indicator
	Load shelf (2 freely adjustable)
Protection	Overheat protection circuit breaker
	Compressor overload protection
	Control system overload protection
	Overload indicator
	Phase sequence protection
	High voltage and low voltage protection
	Over temperature protection
	Fan overcurrent protection
Power supply	AC 3Ψ380V 60/50Hz
Customization	Special requirements, custom service

Company Profile

 

FAQ

1.Q :How to provide after-sales service?
A:If customers need our engineers to come to the site for service, we will send out engineers to provide repair service for you.

2.Q: Can we visit and study in your factory?
A: Welcome to visit and study in our factory, we will show you our R&D and production capacity.

3.Q :Can I install and commission the calibration equipment on site?
A: Yes, we can send technicians and engineers to the customer's site for installation, commissioning and calibration.

4.Q: What are the transportation methods?
A :Air freight, sea freight, railroad transportation, all transportation methods according to the customer's needs.

5.Q : What are the packing methods?
A: Standard export wooden box packaging, solid and firm.

6.Q :How do you calibrate the equipment?
A: We have our own calibration and third-party calibration.

7.Q :What are the payment methods?
A :The payment methods are T/T, CIF, Paypal, L/C, VISA and so on.

8.Q :How long is the warranty period?
A :Warranty is 1 year, lifetime free service.

9.Q :What is the delivery time for your company's products?
A :This depends on the actual product you order, usually at least 30 days.