IPX9 Rain Test Chamber is used to test the water resistance; which is mainly for electronic and electrical products and solar lights, garden lights, buried lights, tunnel lights, car lights, fountain lights, the display...etc led lights series testing. It can also provide references for product design and quality control.
This product uses the scientific design makes the device capable of realistic simulation drip, water spray, splashing water, environmental, water and so on. Into the overall control system and the use of inverter technology, making the rotation angle of rainfall in the test frame, spray angle and swing the pendulum swinging spray volume can automatically adjust the frequency.
IPX34 Rain spray test room meet standard:
GB10485-89
The outside layer is composed of the high quality stainless steel plate, the inner container is the composed of stainless steel tabula rasa.
Large area of visible glass door, easy to observe the test specimens in the testing chamber
The button is made of high quality of tank, can be fixed PU activities wheel, it is convenient for user moved.
With 270 degree swing pipe & 360 degrees whorl pole water jet device.
Adjustable speed samples stage.
Waterproof Rating:
IPX-1 Protected against falling water Equivalent to 3-5mm rainfall per minute for a duration of 10 minutes.
Unit is placed in its normal operating position.
IPX-2 Protected against falling water when tilted up to 15 degrees - Same as IPX-1 but unit is tested in 4 fixed positions -
tilted 15 degrees in each direction from normal operating position.
IPX-3 Protected against spraying water - Water spraying up to 60 degrees from vertical at 10 liters/min at a pressure of 80-100kN/m2 for 5 min.
IPX-4 Protected against splashing water - Same as IPX-3 but water is sprayed at all angles.
IPX-5 Protected against water jets - Water projected at all angles through a 6.3mm nozzle at a flow rate of 12.5 liters/min at
a pressure of 30kN/m2 for 3 minutes from a distance of 3 meters.
IPX-6 Protected against heavy seas - Water projected at all angles through a 12.5mm nozzle at a flow rate of 100 liters/min at
a pressure of 100kN/m2 for 3 minutes from a distance of 3 meters.
IPX-7 Protected against water immersion - Immersion for 30 minutes at a depth of 1 meter.
IPX-8 Protected against water submersion - The equipment is suitable for continual submersion in water under conditions which are identified by the manufacturer.
| Project Model |
HY-100 |
HY-101 |
HY-102 |
| Studio size (D*W*Hmm) |
800*800*800 |
1000*1000*1000 |
1400*1600*1400 |
| Water spray ring radius |
200mm |
400mm |
600mm |
| Water spray hole size |
Diameter 0.33mm/0.4mm/0.8mm |
| Aperture spacing |
25.4mm/50mm |
| Pendulum swing |
0°~360° (adjustable) |
| Test bed speed |
1r/min(Also can be stepless speed regulation <optional>) |
){kind=link}