The High And Low Temperature Impact Test Chamber fully absorbs the advantages of similar products at home and abroad, and adopts double-box upper and lower structures, which are respectively a high temperature box and a low temperature box. Two regional thermal shock test chambers are used to test the endurance of parts subjected to rapid temperature changes. They are suitable for reliability testing of electrical, electronic and other equipment under simulated conditions with drastic changes in temperature, and are suitable for quality control laboratories. Meet commercial and products in the production process.
1.Three boxes of mobile upper and lower structure, the upper box is a high temperature box, and the lower box is a low temperature box. It can also be designed according to user requirements to manufacture two box type temperature impact test chambers with left and right structures.
2.Excellent French imported Tecumseh compressors, which are more efficient and more stable and reliable.
3.Ceramic stainless steel tungsten wire electric heater with a longer life and higher thermal efficiency.
4.5 minutes recovery time, organization transfer time within 15 seconds.
5.Test temperature from -80 ° C to 200 ° C.
6.Industrial computer designed controller with large-area LCD display and touch screen, powerful and scalable.
7.The latest environmentally friendly refrigerant (R404a/R23).
8.The protection functions include studio over temperature, compressor overload, overpressure, oil pressure overpressure, fan overload, phase loss, compressor delay and so on. From time to time, there are several users who choose the security protection features, such as the wind speed is too low, the door is not closed, and so on.
The high and low temperature impact test chamber is suitable for the safety performance test of electronic components, providing reliability test, product screening test, etc.. Meanwhile, product reliability and product quality control can be improved by testing with this equipment.
Auxiliary structure
Sealing: Double-layer high-temperature resistant and high-strength sealing strips are used between the door and the box to ensure the sealing of the test area.
Door handle: adopting non-reaction door handle, more convenient operation
Sample rack moving mode: the sample rack relies on the linear reciprocating drive system installed at the bottom of the box to move up and down.
Casters: The bottom of the machine adopts high-quality fixable PU movable wheels.
It adopts a vertical body and two hot and cold boxes, using the basket to switch the experimental area where the test samples are located, to achieve the purpose of the cold and thermal shock test; This structure minimizes the thermal load during the cold and thermal shock, and shortens the temperature recovery time. It is also the most reliable and energy-saving method of cold and thermal shock.
Temperature operation control system
| Controller |
Imported LED digital display (P, I, D+S, S, R.) microcomputer integrated controller |
| Heating system |
Fully independent system, nickel-chromium alloy electric heating heater |
| Cooling System |
Fully enclosed air-cooled single-stage compression refrigeration method/original French "Taikang"/fully enclosed air-cooled cascade compression refrigeration method |
| Circulatory system |
Temperature-resistant and low-noise air-conditioning motor. Multi-blade centrifugal wind wheel |
| Temperature range |
A: -20ºC~200ºC B: -40ºC~200ºC C: -60ºC~200ºC |
| Pre-heat limit |
200ºC |
| Pre-cool lower limit |
-80ºC, optional -65ºC(model A)or -70ºC(Model B) |
| Temp.heat-up time |
Ambient temp. to 200ºC within 30 min. |
1.Q :How to provide after-sales service?
A:If customers need our engineers to come to the site for service, we will send out engineers to provide repair service for you.
2.Q: Can we visit and study in your factory?
A: Welcome to visit and study in our factory, we will show you our R&D and production capacity.
3.Q :Can I install and commission the calibration equipment on site?
A: Yes, we can send technicians and engineers to the customer's site for installation, commissioning and calibration.
4.Q: What are the transportation methods?
A :Air freight, sea freight, railroad transportation, all transportation methods according to the customer's needs.
5.Q : What are the packing methods?
A: Standard export wooden box packaging, solid and firm.
6.Q :How do you calibrate the equipment?
A: We have our own calibration and third-party calibration.
7.Q :What are the payment methods?
A :The payment methods are T/T, CIF, Paypal, L/C, VISA and so on.
8.Q :How long is the warranty period?
A :Warranty is 1 year, lifetime free service.
9.Q :What is the delivery time for your company's products?
A :This depends on the actual product you order, usually at least 30 days.
Audited Supplier 
){kind=link}