| After-sales Service: | 1 Year |
|---|---|
| Power Supply: | AC 380V |
| Certification: | CE, TUV, ISO |
| Warranty: | 1 Year |
| Studio Size (mm): | 950X950X850 |
| Temperature Range: | Rt+10 Degree~80 Degree |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Xenon lamp aging test chamber is to test the performance test of the storage, transportation and use of products in the climate environment of light, rain, condensation, temperature, humidity and wind.This machine mainly adopts the sunlight type carbon arc lamp as the radiation light source, controls the temperature, relative temperature, regular spraying, and is equipped with rotatable specimen racks and other functions to simulate the natural climatic factors for artificial climate accelerated aging test equipment.
Contracted in accordance with CNS-11229. JIS-B-7751. ASTM-G-23. JISB7753-2007 Standard Specifications
It uses an intelligent temperature and humidity controller for temperature control, with PID adjustment and fast self-tuning. It can set a variety of parameters. The temperature is directly displayed digitally, and the reading is extremely convenient.
| Machine parameters | |
| 1. Inner chamber size | 1000*1000*1000mm (L*W*H) mm |
| 2. illuminant | Semi-hermetic carbon arc lamp |
| 3. Periodic test time | For 72 hours, use four groups of eight carbon rods at a time |
| 4. Carbon rod type | Ultraviolet discoloration carbon rod |
| Staminated carbon rods:Diameter13 ±0.4 mm, length 305 ±3mm | |
| carbon rods:Diameter13 ±0.4 mm,length305 ±3mm | |
| 5. Arc voltage, current value | AC Voltage: Allowable Range125 ~ 145V,Central value 135 ±10V |
| C Voltage: Allowable Range15 ~ 17A,Central value 16 ±2A | |
| 6. Carbon arc lamp filter cover | Glass Bell Cover for High Temperature, Colorless and Transparent (Effective Time Limit 2000 Hours) |
| 7. Fixed Rotary Frame for Test Specimens | a. Stainless steel products, diameter 508 ±10mm * 3r.p.m |
| Standard specimens can be loaded 1.50 * 100mm (WxL) * 20 (double-piece hanger) (optional) | |
| 2.70 * 150mm (WxL) * 20pic (Monolithic hanger) | |
| 8.Use range of temperature and humidity: according to blackboard thermometer | a. Temperature range of studio:35ºC~~80ºC, blackboard temperature:40ºC~~110ºC |
| b.Humidity range: illumination 10~75% darkness10%~100% ps.Environmental conditions: room temperature:25 ±3ºC,relative humidity:65 ±20% | |
| c.Temperature control mode: automatic adjustment of intake and exhaust, balanced control of temperature | |
| 9.spray | Regular spraying can be adjusted 12 times per hour |
| Another water supply equipment (customer self-care): | |
| 1. Water pressure 1.5-3.0 kg f/cm 2 | |
| 2. Water temperature 10-20 ºC | |
| 3. Water quality PH 6.0-8.0. Hard water softening or pure water devices should be used when necessary. | |
| 10. Structure and Materials | A. The test tank is stainless steel sheet SUS304, and the body shell is sprayed with steel sheet. |
| B. Installation of anti-ultraviolet window on test groove door | |
| C. The insulating layer is temperature-resistant PU foamed cotton | |
| 11. Control instrument | A. Power supply main switch: electric fuseless switch (N.F.B. AC220V single-phase 40A) |
| B. Operating time control: Microcomputer digital type with power outage memory device (0~99.9 hr) | |
| C. Test Temperature Control: Microcomputer Digital Type with Signal Output Device (0-100 ºC) | |
| D. Carbon arc lamp system: voltmeter-digital type, with signal output device (0-250V) ammeter-digital type, with signal output device (0-100A) | |
| E. Various operating switches: start, stop, turn, carbon arc lamp | |
| F. Safety alarm control: low water level, air supply overload, rotary overload, overtemperature, carbon arc lamp voltage, current overload and other safety alarm control | |
| 12. Accessory parts | A. Power supply automatic regulator (200-240V 7Kva) |
| B. Carbon arc lamp filter hood (heat-resistant enhancement type * 1) | |
| C. Carbon rods for carbon arc lamps (2 with and 2 without carbon rods each) | |
| D. Stainless steel specimens hanger (20 pieces - single or double pieces, optional one) | |
| E. Black-disk thermometers (group 1) | |
| F. Operational Instructions (1) | |
1.Q :How to provide after-sales service?
A:If customers need our engineers to come to the site for service, we will send out engineers to provide repair service for you.
2.Q: Can we visit and study in your factory?
A: Welcome to visit and study in our factory, we will show you our R&D and production capacity.
3.Q :Can I install and commission the calibration equipment on site?
A: Yes, we can send technicians and engineers to the customer's site for installation, commissioning and calibration.
4.Q: What are the transportation methods?
A :Air freight, sea freight, railroad transportation, all transportation methods according to the customer's needs.
5.Q : What are the packing methods?
A: Standard export wooden box packaging, solid and firm.
6.Q :How do you calibrate the equipment?
A: We have our own calibration and third-party calibration.
7.Q :What are the payment methods?
A :The payment methods are T/T, CIF, Paypal, L/C, VISA and so on.
8.Q :How long is the warranty period?
A :Warranty is 1 year, lifetime free service.
9.Q :What is the delivery time for your company's products?
A :This depends on the actual product you order, usually at least 30 days.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}