Cigarette smoke generator (purifier environmental cabin package)
Category: Air purifier, fresh air performance test series
Product introduction: This generator uses the positive pressure air blowing method to generate smoke. The cigarette is fixed on the base cigarette holder. The combustion chamber tube is connected to the base. Use the cigarette lighter to light the cigarette. At the same time, the timer starts. The cigarette is within (40 ~50) s. After the combustion is completed, the solid particles (cigarette smoke) are introduced into the test chamber through the smoke outlet pipe at the end of the cigarette holder. After the cigarette burns out, turn off the air intake pump and cut off the smoke output, enter the working state of the circulating air pump, and filter out the remaining smoke in the original combustion chamber window.
The smoke generator uses the positive pressure air blowing method to generate smoke, the cigarette is fixed on the base cigarette holder, the combustion chamber is connected to the base, the cigarette is lit with a cigarette lighter, and the timer is started at the same time, and the cigarette is burned within (40-50) s. , the solid particles (cigarette smoke) are introduced into the test chamber through the smoke outlet pipe at the rear of the cigarette holder.
The smoke generator uses the positive pressure air blowing method to generate smoke. Fix the cigarette on the base cigarette holder. The combustion chamber tube is connected to the base. Use the cigarette lighter to light the cigarette and start the timing. The cigarette will burn out within (40~50). Particulate matter (cigarette smoke) is introduced into the test chamber through the smoke outlet pipe at the end of the cigarette.
| 1. Generator flow range |
1-5L/min |
| 2. The time of each smoking |
40~50S |
| 3. Power |
AC, single phase 220V/50Hz |
| 4. Maximum power consumption |
100W(Cigarette lighter power) |
| 5. Weight |
7kg |
| 6. Dimensions |
360×270×400H mm width x depth x height |
){kind=link}