LED Ipx5 Rain Test Chamber

• Customization: Available
• After-sales Service: 1 Year
• Material: Stainless Steel
• Model NO.: HY
• Type: Environmental Test Chamber
• Structure: Other
• Warranty: 1 Year
• Protection Level: Other
• Voltage: 380V
• Rated Load: Other
• Application: Industry, Aerospace, Electrical and Electronics
• Customized: Customized
• Surface Treatment: Other
• Water Spray Hole Size: Diameter 0.33mm/0.4mm/0.8mm
• Aperture Spacing: 25.4mm/50mm
• Pendulum Swing: 0°~360° (Adjustable)
• Test Bed Speed: 1r/Min
• Transport Package: Strong Wooden Case
• Specification: Customized
• Trademark: HUANYI
• Origin: China
• HS Code: 9013809000
• Production Capacity: 10000pieces/Year

Product Description

Product Description

LED IPX5 Rain Test Chamber is used to test the water resistance; which is mainly for electronic and electrical products. It can also provide references for product design and quality control.

Meet the standards

IPX34 Rain spray test room meet standard:

GB10485-89

Features

1.The inner box of the test is equipped with LED waterproof lighting and a large observation window on the door to facilitate the observation of the test conditions in the box.
2.The shell is made of domestic high quality steel plate, the surface is sprayed with baking paint, beautiful and durable.
3.The equipment has its own water tank and recycled water, so there is no need to build a professional waterproof testing room.Built-in water tank high and low water level alarm monitoring to prevent water pump damage.
4.Automatic compressed air air drying rain board, can drain the excess water in the drip box, to avoid long time water fouling and plug pinhole.
5.The outer case of the equipment is made of high quality stainless steel, the inner case and the turntable are all made of SUS304 stainless steel, with high corrosion resistance.
6.Intelligent control touch screen, LED lighting, high efficiency.
7.Conform to the Test distance for 2.5-3m.

Introduction

Waterproof Rating:

IPX-1 Protected against falling water Equivalent to 3-5mm rainfall per minute for a duration of 10 minutes. 
Unit is placed in its normal operating position. 
IPX-2 Protected against falling water when tilted up to 15 degrees - Same as IPX-1 but unit is tested in 4 fixed positions - 
tilted 15 degrees in each direction from normal operating position. 
IPX-3 Protected against spraying water - Water spraying up to 60 degrees from vertical at 10 liters/min at a pressure of 80-100kN/m2 for 5 min. 
IPX-4 Protected against splashing water - Same as IPX-3 but water is sprayed at all angles.
IPX-5 Protected against water jets - Water projected at all angles through a 6.3mm nozzle at a flow rate of 12.5 liters/min at 
a pressure of 30kN/m2 for 3 minutes from a distance of 3 meters. 
IPX-6 Protected against heavy seas - Water projected at all angles through a 12.5mm nozzle at a flow rate of 100 liters/min at 
a pressure of 100kN/m2 for 3 minutes from a distance of 3 meters. 
IPX-7 Protected against water immersion - Immersion for 30 minutes at a depth of 1 meter. 
IPX-8 Protected against water submersion - The equipment is suitable for continual submersion in water under conditions which are identified by the manufacturer.
 

Product Parameters

 

Project Model	HY-100	HY-101	HY-102
Studio size (D*W*Hmm)	800*800*800	1000*1000*1000	1400*1600*1400
Water spray ring radius	200mm	400mm	600mm
Water spray hole size	Diameter 0.33mm/0.4mm/0.8mm
Aperture spacing	25.4mm/50mm
Pendulum swing	0°~360° (adjustable)
Test bed speed	1r/min(Also can be stepless speed regulation <optional>)

 

Detailed Photos

 

Company Information

FAQ

1.Q :How to provide after-sales service?
A:If customers need our engineers to come to the site for service, we will send out engineers to provide repair service for you.

2.Q: Can we visit and study in your factory?
A: Welcome to visit and study in our factory, we will show you our R&D and production capacity.

3.Q :Can I install and commission the calibration equipment on site?
A: Yes, we can send technicians and engineers to the customer's site for installation, commissioning and calibration.

4.Q: What are the transportation methods?
A :Air freight, sea freight, railroad transportation, all transportation methods according to the customer's needs.

5.Q : What are the packing methods?
A: Standard export wooden box packaging, solid and firm.

6.Q :How do you calibrate the equipment?
A: We have our own calibration and third-party calibration.

7.Q :What are the payment methods?
A :The payment methods are T/T, CIF, Paypal, L/C, VISA and so on.

8.Q :How long is the warranty period?
A :Warranty is 1 year, lifetime free service.

9.Q :What is the delivery time for your company's products?
A :This depends on the actual product you order, usually at least 30 days.