| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Power Supply: | 220V |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
GB 31241-2014 "Safety Requirements for Lithium-Ion Batteries and Battery Packs for Portable Electronic Products"
GB/T 18287-2013 "General Specification for Lithium-Ion Batteries for Cellular Phones" External Short Circuit Requirements1. Structural method: Integral upper and lower structure, the working room is located on the right side of the chamber, which contains circulating air ducts, heaters, evaporators, etc., the refrigeration unit is located under the chamber, and the electrical control cabinet is located on the side of the chamber.
2. Outer chamber material: high-quality carbon steel plate, surface treated with electrostatic color spraying
3. Internal material: matte stainless steel plate (SUS #304 1.0mm thick)
4. Insulation material: rigid polyurethane foam and ultra-fine glass fiber (insulation thickness: 100mm) insulation coefficient: 0.022w/m.k
5. chamber door: The insulation door panel is made of the same material as the chamber body. The hinge connecting the explosion-proof door and the chamber body is made of reinforced 304# stainless steel. At the same time, the door lock uses a powerful flat lock to ensure the safety of the equipment. The front of the chamber An explosion-proof chain is installed on the back pressure relief door. When the battery explosion causes a huge impact and pushes the equipment door open, the explosion-proof chain acts as a buffer to prevent the door from being completely opened or flushed out, thereby preventing secondary injuries. .
6. Observation window: three layers of vacuum tempered glass (with a layer of explosion-proof film on the outside), size: 400mm×500mm (width×height), electric heating device to prevent moisture condensation, a total of 1 is installed on the door to facilitate the observation of samples. , there is a 304 stainless steel explosion-proof net at the window inside the chamber to prevent the battery explosion from hitting the window glass. The door is equipped with a heating and anti-sweat multi-layer vacuum large glass observation window (W400 m*H500m), with electric heating (automatic adjustment) to prevent knotting. Frost and anti-condensation devices.
7. Heater: Ceramic stainless steel explosion-proof electric heater, dual protection provided by gas-type ultra-warm and electromagnetic switch.
8. Special humidifier spiral type: humidification barrel heating and humidification method, stainless steel armored heater
9. Lead hole: A φ50mm lead hole on the left side of the chamber, equipped with silicone isolation plug and hole cover;
10. Door handle: adopts a pull-type structure, single opening, right handle, convenient and easy opening and closing, beautiful and generous.
11. Mobile casters: including four mobile casters (with foot cups)
| Studio size | W 500 × H 600 × D 500 mm (W width × H height × D depth) |
| Dimensions | W 700 × H 1670× D 1500 mm (W width × H height × D depth) |
| Volume | 150L |
| Temperature and humidity: | |
| Temperature range | -40ºC~+150ºC temperature adjustable |
| Temperature deviation | ≤±2.0ºC |
| Temperature fluctuation | ≤±0.5ºC |
| Temperature uniformity | 2.0ºC |
| Humidity deviation | ±3.0%RH |
| Heating and cooling rate | From (RT~100ºC), ≤25min, (when no load, ambient temperature +25ºC), the average temperature rise is 1~3ºC per minute From (RT~-40ºC), ≤60min, (when no load, ambient temperature +25ºC), the average cooling is 0.8~1.2ºC per minute |
| Humidity range | 20%RH~98%RH |
| Humidity fluctuation | ±2.5%RH |
| Noise | ≤65dB |
| Equipment weight | About 180KG |
| Power supply | AC220V/50HZ single phase, total power about 6KW, current 32A |
){kind=link}