Programmable High and Low Temperature Solid State Drive SSD Bit Aging Test Chamber

• Customization: Available
• After-sales Service: 1 Year
• Power Supply: 380V
• Model NO.: HYHT
• Certification: CE, TUV
• Warranty: 1 Year
• Temperature Range: Rt+15ºC~100ºC
• Temperature Fluctuation: ±1ºC
• Temperature Uniformity: ±2ºC Without Load, ±5ºC
• Heating Rate: 5ºC/Min
• Time Setting: 0~9999h Can Be Set Arbitrarily
• Transport Package: Strong Wooden Case
• Specification: Customized
• Trademark: HUANYI
• Origin: China
• HS Code: 9013809000
• Production Capacity: 10000pieces/Year

Product Description

Product Description

1. Product introduction:

The programmable high and low temperature SSD BIT aging test chamber can be used for batch high/low temperature humidity aging testing of SSD solid state drives, or for high and low temperature humidity aging testing of PCB circuit boards, various materials, electronic products, etc.
 

Meet the standards

YD/T 3824-2021 Solid-state drive testing specifications for Internet applications

YD/T 3825-2021 Mechanical hard drive testing specifications for Internet applications

T/CCSA 266-2019 Test Specification for Solid State Drives for Data Centers

T/CCSA 266-2019 Test Specification for Solid State Drives for Data Centers
 

Features

1) Support multiple SSD tests: To test different SSD products, you only need to replace the test board. When the test board carrying the SSD product is inserted into the control board, the control board can intelligently identify the inserted SSD type and configure it into different PCIe interfaces. Tests can be reused without redesign, effectively reducing testing costs;

2) High integration: A modular industrial computer is used and installed on the control board in the form of a carrier board, which greatly improves product integration. The SSD test environment and SSD detection are implemented on one unit at the same time;

3) Remote operation: Various test instructions can be issued remotely to the target test unit, thereby facilitating the diagnosis of various problems that may be encountered during factory testing;

4) Improve test consistency: Applicable to all testing stages of SSD products, including the engineer development and verification stage, thereby ensuring test consistency and avoiding test inconsistencies caused by replacing different test equipment.
 

Product Parameters

Temperature range: -70ºC~150ºC
Temperature uniformity Temperature fluctuation: ≤2ºC (no load)
Humidity range: ±0.5ºC (no load)
Humidity uniformity: 20%~98%RH
Humidity fluctuation: ±2%-3%RH
Heating rate: ±2%
Cooling rate: 1.0~3.0ºC/min
Time setting range: 0.7~1.0C/min
Test hole: 1-60000M
Observation window: Installed on the left side of the machine, used for external test power lines or signal lines, using 210x275mm or 395x395mm (effective field of view)
 

1. SSD RDT aging test chamber
The specific configuration is as follows:
1. Inner dimensions of oven	W1200×D350×H1200mm.
2. SSD RDT aging test chamber  dimensions	(The actual object shall prevail)
3. The box shell is made of δ1.5mm cold-rolled steel plate and is reinforced by bending and forming.
4. The inner liner and interlayer of the box are made of δ1.2mm galvanized steel plate by bending and forming.
5. The insulation layer of the box is filled with high-quality rock wool, with a thickness of 50mm.
6. The oven is equipped with double doors, and an observation window is designed on the door. It is equipped with a double-layer configuration of 8mm tempered glass and the size is about W350×H1000mm.
7. The bottom of the oven is equipped with an adjusting foot cup, one of which is equipped with 4 universal wheels.
8. There is an adjustable exhaust gas outlet on the top of the oven.
9. The oven circulates air using a Taiwan-made 1/2HP vertical motor and is equipped with a 9-inch reinforced multi-wing air fan. Wheel, designed to transport wind up and down.
10. The oven heating system uses high-quality stainless steel heating pipes with radiators, and the power is about 3.6KW.
11. The oven heating temperature is adjustable from room temperature to 80°C.
12. The oven temperature control adopts RKC digital display intelligent thermostat, and the over-temperature protection adopts mechanical thermostat.controller configuration.
13. The electrical box is designed with secondary temperature control, power indication, fault indication, time controller, andSet up over-temperature timeout audible alarm and automatic power-off control functions.
14. The circuit board, power supply and screws for fixing the circuit board that need to be installed in the aging box shall be provided by the purchaser.The supplier is responsible for installation and wiring.
15. After professional anti-rust treatment, the surface of the oven is treated with computer color oil paint.

Detailed Photos

Company Information