Mechanical Impact Resistance Test Machine Battery Acceleration Shock Test Bench

• Customization: Available
• After-sales Service: Remote Operation, Video Calls, House Calls
• Warranty: 1 Year
• Model NO.: HYS-3
• Max Diameter of Workpiece: Customizable
• Mass Scope of Workpiece: Customizable
• Type: Impact Testing Machine
• Maxcapacity: Customizable
• Accuracy Grade: Customizable
• Load Way: Electronic Load
• Loading Method: Customizable
• Display: Digital
• Control: Computer Control
• Weight: Customizable
• Power Source: AC220V
• Oil Cylinder Position: Customizable
• Rated Load (Kg): 50 (Including Fixtures, Test Pieces, Sensors, etc.
• Shock Pulse Waveform: Half Sine Wave
• Pulse Form: Free Fall
• Continuous Impact Times: Not Less Than 3 Times
• Power Supply: 220VAC±10% 50Hz
• Temperature (°c): 0~40
• Humidity (25 ° C): <85%
• Stable Gas Source (MPa): ≤0.8MPa
• Transport Package: Standard Export Wooden Box
• Specification: Customized
• Trademark: HUANYI
• Origin: China
• HS Code: 9024800000
• Production Capacity: 10000pieces/Year

Product Description

Introduction

Mechanical Impact Resistance Test Machine  Used to measure and determine the impact resistance of products or packaging, to assess the functional reliability and structural integrity of the test product under impact environment

Meet the standards

This equipment meets GB/T2423.5 "Basic Environmental Test Procedures for Electrical and Electronic Products Ea: Impact Test Method", GB/T2423.6 "Basic Environmental Test Procedure for Electrical and Electronic Products Ea: Collision Test Method", GJB150.18-2008 "Military Equipment environmental test method: impact test and other relevant test standards for impact test requirements. For the new energy sector, meet GB/T 31467.3-2015.

 

Control System

(1)    Windows-based stable control system: fully automatic remote control interface, the operator only needs to input simple values;

(2)    Full air pressure drive lift, impact, clean and environmentally friendly, good repeatability and high reliability;
(3)    It can pass steel welded table with high strength and hardness and high first-order resonance frequency, low noise and no clutter generation; adjust gas pressure to control shock frequency, frequency is continuously adjustable, system is more stable and reliable, and software operation is convenient ;
(4)    The test time and the number of impacts can be set arbitrarily, and the machine will automatically stop after the test is completed, which is convenient for users to operate;
(5)    Perfect measurement system: various waveform tolerance bands of system memory, convenient for users to adjust and apply, automatically complete the test report generation after the end of the test;
(6)    The control unit has door protection, flying protection and zero signal protection to ensure the safety of the system.
(7)    Advanced drive system: It is driven by full air pressure, with simple structure and high reliability. And no pollution, can keep the environment clean and sanitary;
(8)    High efficiency and high precision: The advanced pneumatic drive and control system greatly improves the test efficiency;
(9)    Double-track guide post: combined with pneumatic balance lifting system, no noise, fully automatic positioning table;
(10)    Convenient installation: The device comes with high-performance buffer vibration isolation device, no need for special foundation, easy to install, safe and reliable.

Product Parameters

Main technical indicators
Rated load (kg)		50 (including fixtures, test pieces, sensors, etc.)
Shock pulse waveform		Half sine wave
Pulse form		Free fall
Peak acceleration (m/s2)		Half sine: 150 m/s2 to 5000 m/s2 (1g=9.8 m/s2, up to 600g at 3ms) After peak sawtooth wave: 150 m/s2 to 3000 m/s2 Trapezoidal wave: 150 m/s2 to 1000 m/s2
Pulse duration (ms)		Half sine: 30ms ~ 1ms After peak sawtooth wave: 18ms ~ 3ms Trapezoidal wave: 18ms ~ 6ms Maximum speed change rate: ≥7.4m/sec Lifting height: 1500mm (using hydraulic lifting, designed for international mainstream)
Impact direction		Z axis
Continuous impact times		Not less than 3 times
Precision requirements		Meet the 6.2.2 tolerance requirements in GJB 150.18A
Table size (length × width)		500mm×500mm
Dimensions (length × width × height)		Subject to the real thing
Total weight of equipment (kg)		2500
power supply		220VAC±10% 50Hz
User provides environmental conditions	Temperature (°C)	0~40
	Humidity (25 ° C)	<85%
	Stable gas source (MPa)	≤0.8MPa
Applicable standard		GB2423, GJB150, GB/T 31467.3, IEC68-2-29, etc.

Company Profile