After-sales Service: | 1 Year |
---|---|
Material: | Stainless Steel |
Type: | Environmental Test Chamber |
Structure: | Vertical |
Warranty: | 1 Year |
Protection Level: | Many Choices |
Customization: |
---|
Suppliers with verified business licenses
The four-integrated test chamber is a comprehensive evaluation of a product's resilience to four key environmental stresses: temperature, humidity, vibration, and low air pressure. This test is used to assess the products in the temperature and humidity, vibration, low air pressure, and transportation environments to determine their adaptability.
In contrast to the role of a single factor, the four-integrated test more accurately reflects the electrical and electronic products in the transportation and actual use process, where temperature, humidity, and vibration are combined to simulate the composite environmental changes that occur during transportation. This test is essential for the development of new products, prototype testing, and product qualification testing.
1. Temperature and humidity, vibration composite environmental test system can be applied to the product temperature, humidity, vibration, impact and other environmental stress, to examine the reliability of the product in the case of comprehensive stress
2. By the temperature and humidity test chamber and electrodynamic vibration test system combination.GB/T2423.1 Test A: Low temperature test method
GB/T2423.2 Test B: High temperature test method
GB/T2423.3 Constant damp heat test
GB/T2423.4 Alternating humidity and heat test
GB/T2423.21 Low air pressure test method
GB/T2423.27 Low temperature, low air pressure, humidity and heat continuous integrated test
GJB150.2A Low air pressure (height) test
GJB150.3A High temperature test
GJB150.4A Low temperature test
GJB150.9A Damp heat test
GJB150.24A Temperature-Humidity-Vibration-Altitude test
GJB150.2 Environmental test methods for military equipment Low pressure test
GJB150.6 Environmental test methods for military equipment Temperature-height test;
GJB150.19 Environmental test methods for military equipment Temperature-height-humidity test;
RTCA-DO-160 related test requirements;
Model |
HTHV408 |
HTHV1000 |
Test Space Volume(L) |
408 |
1000 |
Interior dimensions (cm) |
60*85*80 |
100*100*100 |
Temp. range |
-70ºC~150ºC |
|
Temp. fluctuation |
≤0.5ºC |
|
Humidity range |
20%~98%RH |
|
Humidity uniformity |
±2.0ºC |
|
Humidity fluctuation |
≤2.5%RH |
|
Humidity deviation |
>75%RH, ±3.0%;≤75%RH, ±5.0% |
|
Temp rise and drop |
1ºC/min~15ºC/min |
|
Interior material |
Stainless steel SUS 304 |
|
Exterior material |
Rust proof cool rolled steel plate with surface coating |
|
Insulation material |
Hard PUR foam plastic |
|
Refrigerator |
Original imported Fully hermetic/ semi-hermetic compressor |
|
Cooling mode |
Water cooled |
|
Heater |
Quality nickel-chromium alloy heaters |
|
Blower |
Centrifugal blower |
|
Door window |
470mm*350mmelectric film painted hollow glasses |
|
Humidifier |
Water tray humidifier |
|
Temp sensor |
PT100 Platinum resistance sensor |
|
Controller |
Touch screen programmable controller |
|
Power |
AC 380V/50HZ |
|
Vibration table |
Optional according to customer's requirement |
|
Safety device |
Over temperature protection, compressor lack of oil, over pressure, cut-current, overload protection, lack of water protection, ventilator overload protection |
|
Standard configuration |
Observation window, testing hole, sample shelve, temperature resistance light |
|
Select accessories |
Specialized testing hole, Specialized sample shelve, extra sample holder |
|
Ambient Temp. |
5ºC~35ºC |
|
Temp. adjustment method |
BTHC mode |
Suppliers with verified business licenses