| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Power Supply: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
In order to better meet the reliability and safety testing needs of fuel cell systems in extreme environments, the fuel hydrogen cell low pressure test chamber came into being. The following is a brief introduction to "HUANYI Instruments' recent low-pressure test chamber solution for fuel hydrogen cells. This solution provides comprehensive and controllable conditions for environmental testing of fuel cells.
Cooling water circulation system (preferred option):
Stack temperature regulation module: includes three-way valve, stack temperature regulation heat exchanger and cooling water temperature sensor. During the test preparation phase, this module keeps the cooling water consistent with the ambient temperature in the environmental chamber to ensure the stability of the system.
Large circulation module: Used during the test phase, when the cooling water temperature in the fuel cell system needs to continue to rise to the preset value, the cooling water flows through to ensure the continuity and comprehensiveness of the test.
Working process:
Initial stage: The stack temperature is low, the thermostat is closed, the small circulation system is turned on, and the fuel cell system cooling water heats up rapidly.
Over-temperature point: When the cooling water temperature rises to the critical temperature point for thermostat opening, the thermostat opens, allowing the cooling water to flow through the stack temperature adjustment module to accelerate the cooling rate of the fuel cell stack.
Cold soak is completed: When the cooling water temperature sensor detects that the cooling water temperature is the same as the test requirement, it indicates that the cold soak is completed and the cooling fan stops running.
The above scheme can test fuel cells to complete various environmental tests under low pressure conditions.
| Temperature range | -50ºC~+100ºC[Meet static storage requirements] |
| Humidity range | -40ºC~85ºC [meet heat load requirements, maximum heat dissipation of 150kW] 10%~95%RH (within the range of 10ºC~85ºC) [static no heat load] |
| Temperature control accuracy | At 65ºC, the response time for humidity from 10% to 95% does not exceed 100min [static no heat load] temperature and humidity 60ºC/90%RH [heat load 150kW] |
| Temperature fluctuation | <=±1ºC [when the engine is not running], S+3ºC [when the engine is running, the maximum heat dissipation is 150kW |
| Temperature uniformity | <=±0.5ºC [no load], <=±3ºC [with load 150KW] |
| Humidity control accuracy | <=2.0ºC[When the engine is in the cabin without heat dissipation] |
| Humidity fluctuation | Within ±5%RH [no load] |
| Heating rate | -40ºC~+85ºC, the average speed of the whole process is 1ºC/min [540kg electric stack is placed inside to dissipate heat 150W |
| Cooling rate | +80ºC~-40ºC, the average speed of the whole process is 1ºC/min [540kg electric stack is placed inside to dissipate heat |
| Customer testing product | Test product: metal fuel cell stack engine + total weight: 540kg + stack power: 150kw |
1.Q :How to provide after-sales service?
A:If customers need our engineers to come to the site for service, we will send out engineers to provide repair service for you.
2.Q: Can we visit and study in your factory?
A: Welcome to visit and study in our factory, we will show you our R&D and production capacity.
3.Q :Can I install and commission the calibration equipment on site?
A: Yes, we can send technicians and engineers to the customer's site for installation, commissioning and calibration.
4.Q: What are the transportation methods?
A :Air freight, sea freight, railroad transportation, all transportation methods according to the customer's needs.
5.Q : What are the packing methods?
A: Standard export wooden box packaging, solid and firm.
6.Q :How do you calibrate the equipment?
A: We have our own calibration and third-party calibration.
7.Q :What are the payment methods?
A :The payment methods are T/T, CIF, Paypal, L/C, VISA and so on.
8.Q :How long is the warranty period?
A :Warranty is 1 year, lifetime free service.
9.Q :What is the delivery time for your company's products?
A :This depends on the actual product you order, usually at least 30 days.
){kind=link}