| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Power Supply: | AC 380V |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
This test chamber provides a clean enclosed space (very low background concentration), does not appearliquid water (to prevent formaldehyde and other components easily absorbed by water to be measured)while controlling the temperature, humidity, wind speed, relative pressure, ventilation rate in the warehouse,which is used to simulate the pollutant release process of products in the environment similar to people'sliving environment. Through monitoring the concentration of pollutants in the warehouse, the releaseamount is determined to evaluate the environmental protection level of the products.
EN 16516
IOS 16000-9
ASTM D 6670
DIN EN 717-1
ГОСТ 30255
ГОСТ 34039
ГОСТ 34040
ГОСТ 34041
ГОСТ 34042
МУК 4.1.3167-14
МУК 4.1.3168-14
МУК 4.1.3170-14
| Specification | |||
| 1 | Volume size | Workroom volume | 1000L±20L |
| Workroom | 850×1100×1080mm(Wide, Deep, High) | ||
| Appearance | Subject to reality | ||
| Gate (door) | 850×1080mm(Wide, High) | ||
| Observation window | 370×540mm(Wide, High) | ||
| 2 | Temperature | Temperature range | 10~40 ºC |
| Temperature fluctuation | <±0.3 ºC | ||
| Temperature deviation | <±0.5ºC | ||
| 3 | Humidity | Humidity range | 30~80% RH |
| Humidity fluctuation | ≤ ± 2% RH | ||
| Humidity deviation | ≤ ±2.5% RH | ||
| 4 | Backgroundvalue | Formaldehyde background value | ≤0.006 mg/m3 |
| Single VOC background | ≤0.002 mg/m3 | ||
| TVOC background value | ≤0.02 mg/m3 | ||
| 5 | Ventilation and sealing | Air exchange rate | 0.2~2.5 times/h |
| Center wind speed (adjustable) | 0.1~1.0 m/s | ||
| Tightness | a) When the positive pressure (gauge pressure) is 1kPa, the air leakage rate in the cabin is VL < 0.5% × cabin capacity/min; b) The air leakage rate in the cabin is VL<5%×air supply rate Vs. |
||
| Recovery rate | >80 % | ||
| Relative barotropic pressure maintained | 10±5 Pa | ||
| 6 | Material | Cabin material | SUS304 mirror stainless steel 1.5mm, round corner, full welding and polishing |
| Shell material | Q235A cold rolled steel plate 1.5mm, surface electrostatic spraying, white | ||
| Sealing material | Imported PTFE and fluororubber | ||
| The insulation material | 100 mm,High Density Polyurethane Foaming | ||
1.Q :How to provide after-sales service?
A:If customers need our engineers to come to the site for service, we will send out engineers to provide repair service for you.
2.Q: Can we visit and study in your factory?
A: Welcome to visit and study in our factory, we will show you our R&D and production capacity.
3.Q :Can I install and commission the calibration equipment on site?
A: Yes, we can send technicians and engineers to the customer's site for installation, commissioning and calibration.
4.Q: What are the transportation methods?
A :Air freight, sea freight, railroad transportation, all transportation methods according to the customer's needs.
5.Q : What are the packing methods?
A: Standard export wooden box packaging, solid and firm.
6.Q :How do you calibrate the equipment?
A: We have our own calibration and third-party calibration.
7.Q :What are the payment methods?
A :The payment methods are T/T, CIF, Paypal, L/C, VISA and so on.
8.Q :How long is the warranty period?
A :Warranty is 1 year, lifetime free service.
9.Q :What is the delivery time for your company's products?
A :This depends on the actual product you order, usually at least 30 days.
){kind=link}