| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Power Supply: | AC 380V |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Vehicle VOC Pretreatment Chamber
Vehicle VOC Pretreatment Environment Chamber can provide a standard temperature and humidity VOC clean environment, place materials and products or their samples in the pretreatment room, adjust the temperature, relative humidity, wind speed, pressure, indoor VOC clean conditions and other environmental conditions in the room, so that the samples can reach the same temperature and humidity in the balance room, and the internal and external pressure of the test pieces is balanced.| Internal dimensions | 8m×5m×4m(L×W×H) |
| Temp. range | 20°C~30°C; |
| Temp. fluctuation | ±0.5°C; |
| Temp. deviation | ±1.0°C; |
| Measurement accuracy | ±0.1°C |
| Humi. range | 50% R.H |
| Humi. deviaton | ±10% R.H |
| Wind speed | ≤0.3m/s |
| Pollutant background concentration | Benzene ≤0.02mg/m3, toluene ≤0.02mg/m3, xylene ≤0.02mg/m3, ethylbenzene ≤0.02mg/m3, styrene ≤0.02mg/m3, formaldehyde ≤0.02mg/m3, acetaldehyde ≤0.02mg/m3, acrolein ≤0.02mg/m3, The TVOC concentration is less than 0.2mg/m3; |
| Atmospheric pressure | Micropositive pressure of 30 ~ 50Pa; |
| Noise | ≤65dB |
| Exhaust gas extraction device | |
| Install exhaust emission devices in the test cabin to discharge vehicle exhaust outside the test building. | |
| The exhaust emission device is connected to the vehicle exhaust pipe using high-temperature resistant hoses, taking into account the connection of the left and right exhaust pipes and the connection methods of different vehicle exhaust pipes to meet the testing needs. | |
| Equipped with an electric air valve to close the pipeline and avoid leakage when not in use, ensuring that the maximum waste discharge is not less than 4000m3/h. | |
| The exhaust emission device has good sealing performance and must not cause exhaust leakage. | |
| Infrared lighting simulation system | |
| Operation temperature:+15ºC~+65ºC,Humidity≤95%RH | |
| Radiation range:About W×D=3000mm×5200mm | |
| Height range: The vertical height is adjustable from 0 to 1m, and it is hoisted in the center of the top of the warehouse. | |
| Radiation intensity: the exclusion of infrared lamps with wavelength <300nm makes the central reference point on the top surface of the car produce an irradiation intensity of 400W/m²±50W/m²; in accordance with the provisions of the ISO12219-1 standard, the irradiation intensity of the central part of the top surface of the car produces an irradiation intensity of 400W/m²±50W/m² within 10min after the infrared lamp is switched on. | |
1.Q :How to provide after-sales service?
A:If customers need our engineers to come to the site for service, we will send out engineers to provide repair service for you.
2.Q: Can we visit and study in your factory?
A: Welcome to visit and study in our factory, we will show you our R&D and production capacity.
3.Q :Can I install and commission the calibration equipment on site?
A: Yes, we can send technicians and engineers to the customer's site for installation, commissioning and calibration.
4.Q: What are the transportation methods?
A :Air freight, sea freight, railroad transportation, all transportation methods according to the customer's needs.
5.Q : What are the packing methods?
A: Standard export wooden box packaging, solid and firm.
6.Q :How do you calibrate the equipment?
A: We have our own calibration and third-party calibration.
7.Q :What are the payment methods?
A :The payment methods are T/T, CIF, Paypal, L/C, VISA and so on.
8.Q :How long is the warranty period?
A :Warranty is 1 year, lifetime free service.
9.Q :What is the delivery time for your company's products?
A :This depends on the actual product you order, usually at least 30 days.
){kind=link}