| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Power Supply: | AC 380V 50Hz |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The two-box hot and cold shock box uses two upper and lower boxes (upper box with high temperature and lower box with low temperature). There is a movable basket in the middle. Samples can be placed in the movable basket. The basket can be switched up and down through the transmission device to quickly switch between the high and low temperature boxes. Thus achieving temperature shock.
| 4. Main technical indicators | |
| Cabinet: | |
| 1.Inner chamber size | About W800*H900*D700 m |
| 2. Overall dimensions | About W800*H900*D700 m (subject to the actual object) |
| 3. Hanging basket size | Approximately W800*H900*D700 m hanging basket volume: 225L |
| temperature: | |
| 1. High room temperature range | +50ºC~+180ºC |
| 2. Temperature rise time | R.T (room temperature)~+180ºC ≤30min |
| 3. Low temperature room temperature range | 0ºC~-70ºC |
| 4. Temperature drop time | R.T (room temperature)~-70ºC ≤50min |
| Basket | |
| 1. Temperature shock range | -55ºC~+150ºC |
| 2.Temperature fluctuation | ≤±0.5ºC (no load, constant state) |
| 3. Temperature uniformity | ≤2ºC (no load, constant state) |
| 4. Temperature deviation | ≤±2ºC (no load, constant state) |
| 5.Conversion time | ≤10S (no load) |
| 6.Test conditions | High temperature +120ºC, exposure time 30min; Low temperature -55 ºC, exposure time 30min |
| 7. Temperature recovery time | Test area temperature recovery time: ≤4min. Impact process (as shown in the figure) |
| 8. Temperature shock method | The controller uses pneumatic actuators to control the cylinder to control the basket to quickly switch up and down between the low temperature box or the high temperature box, forming a closed-circuit air circulation system with the high temperature box or low temperature box respectively to quickly reach the test target temperature. |
| 9. Noise | Within 75db (measured 1 meter from the front of the machine and 1.2 meters from the ground) |
| Note: The above performance indicators are values measured under the conditions of ambient temperature +25ºC, relative humidity ≤85%, and no sample. | |
1.Q :How to provide after-sales service?
A:If customers need our engineers to come to the site for service, we will send out engineers to provide repair service for you.
2.Q: Can we visit and study in your factory?
A: Welcome to visit and study in our factory, we will show you our R&D and production capacity.
3.Q :Can I install and commission the calibration equipment on site?
A: Yes, we can send technicians and engineers to the customer's site for installation, commissioning and calibration.
4.Q: What are the transportation methods?
A :Air freight, sea freight, railroad transportation, all transportation methods according to the customer's needs.
5.Q : What are the packing methods?
A: Standard export wooden box packaging, solid and firm.
6.Q :How do you calibrate the equipment?
A: We have our own calibration and third-party calibration.
7.Q :What are the payment methods?
A :The payment methods are T/T, CIF, Paypal, L/C, VISA and so on.
8.Q :How long is the warranty period?
A :Warranty is 1 year, lifetime free service.
9.Q :What is the delivery time for your company's products?
A :This depends on the actual product you order, usually at least 30 days.
){kind=link}