| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Power Supply: | AC 380V |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Meet the standard:
QB/T 2761-2006 "Determination method of purification effect of indoor air purification products"
| 1. Test chamber | The test chamber material adopts stainless steel frame and 10mm float glass. |
| 2. Under the overpressure of 1000 Pa, the gas leakage rate per minute is less than 0.5% of the volume of the chamber; | |
| 3. The chamber doors and flanges at both ends are pressed and sealed with two pressing handwheels respectively. | |
| 4. The test chamber is equipped with stainless steel sample racks, fluorescent lamps, fans, and sampling ports. | |
| 5. Positive pressure control of test chamber | |
| 6. Air sampling system | The sampling holes are located at a height of 1.3m from the bulkhead to the bilge, and there are three sampling holes on the left bulkhead. Material is copper joint, ball valve control |
| 7. Inner size | 900W*1850H*900Dmm |
){kind=link}