4 Door Cylinder Precision Drying Oven Chamber

• Customization: Available
• After-sales Service: 1 Year
• Power Supply: AC 380V/220V
• Model NO.: HY
• Certification: CE, TUV, ISO
• Warranty: 1 Year
• Power: 3kw
• Control Range: 60-200 Degrees
• Vacuum Limit: 133PA
• Brand: Huanyi
• Temperature Range: Room Temperature +20~200 Degrees
• Temperature Fluctuation: 0.3 Degrees
• Temperature Change: 1.5 Degrees
• Heating Rate Change: 5 Degrees /Min
• Transport Package: Strong Wooden Case
• Specification: Customized
• Trademark: HUANYI
• Origin: China
• HS Code: 9013809000
• Production Capacity: 10000pieces/Year

Product Description

Product Description

Drying oven is a box-type drying equipment that dries dry materials under negative pressure conditions. Its working principle is to use a vacuum pump to extract air and moisture, forming a vacuum state in the working room, lowering the boiling point of water, and speeding up drying. 

Oven system
The door and the inner tank are sealed by silicone rubber strips. There is an air extraction hole at the rear of the working room, which is connected to the vacuum pump, pressure sensor, air inlet solenoid valve, vacuum pressure port on the panel and manual regulating valve at the rear base through pipelines.

The pressure sensor signal is sent to the smart instrument to display the absolute air pressure in the box. The vacuum pressure hole is used for pressure measurement and sampling. Before stopping the machine and opening the door, the air inlet solenoid valve must be opened to inlet air to balance the air pressure inside and outside the box before the door can be opened.
Protection System
1. The PID microcomputer automatic temperature controller used by our company can alarm the over-temperature problem of the machine studio and stop the power output by setting the internal upper and lower temperature limits to protect the products in the machine from over-temperature. and cause unnecessary losses.
2. Over-temperature protection system: When the temperature is out of control due to external forces, this system will automatically stop heating and power supply when it exceeds the set temperature by 10 degrees, thereby protecting the safety of your products and machines.
3. Overload protection system: When the power of the whole machine exceeds the normal power due to excessive external voltage or other reasons, this system will automatically cut off the power to protect the industrial control components of the whole machine from damage.

Features

1.Integrated with incubator and shaker to save space and cost with tempered glass window.

2.ABS shell, stainless steel chamber.

3.Big LCD display showing temperature and shaking velocity.

4.With easy operations of storage function of working parameters. 

5.Auto-recovery after power interruption as originally programmed.

6.Auto-stop protection to keep sample safe when the door is opened. Strong air spring rod with easy opening and closing.
 

Product Parameters

4 Door Cylinder Precision Drying Oven Chamber

Model: HYUO-27 HYUO-72 HYUO-100

Temperature range: +60°C~200°C

Inner box size (WxHxD) cm: 30X30X30 40X45X40 45X50X45

Pressure range: normal pressure ~0.133kpa

Pressure recovery time: s10kpa/min

Cabinet specifications
1. Studio size: W1200mm×D600mm×H600mm (depth×width×height);
2. Air pressure deviation: ±2.5%
3. Vacuuming rate: normal pressure ~ 100kPa, within 10 minutes.
4. The outer dimensions are subject to the actual object.
5. Equipped with a tempered glass window, allowing you to know the status of the products in the box at any time;
6. It is divided into two layers, with two grids and stainless steel mesh, which can be taken out freely;

 

Model	Power	Control Range	Vacuum limit	Workroom Size(W×H×D)CM
HYUO-27-200	3KW	60ºC-200ºC	133Pa	30×30×30
HYUO-72-200	4KW	60ºC-200ºC	133Pa	40×45×40
HYUO-100-200	5KW	60ºC-200ºC	133Pa	45×45×45
HYUO-290-200	7KW	60ºC-200ºC	133Pa	60×95×50

 

Detailed Photos

Company Information

FAQ

1.Q :How to provide after-sales service?
A:If customers need our engineers to come to the site for service, we will send out engineers to provide repair service for you.

2.Q: Can we visit and study in your factory?
A: Welcome to visit and study in our factory, we will show you our R&D and production capacity.

3.Q :Can I install and commission the calibration equipment on site?
A: Yes, we can send technicians and engineers to the customer's site for installation, commissioning and calibration.

4.Q: What are the transportation methods?
A :Air freight, sea freight, railroad transportation, all transportation methods according to the customer's needs.

5.Q : What are the packing methods?
A: Standard export wooden box packaging, solid and firm.

6.Q :How do you calibrate the equipment?
A: We have our own calibration and third-party calibration.

7.Q :What are the payment methods?
A :The payment methods are T/T, CIF, Paypal, L/C, VISA and so on.

8.Q :How long is the warranty period?
A :Warranty is 1 year, lifetime free service.

9.Q :What is the delivery time for your company's products?
A :This depends on the actual product you order, usually at least 30 days.