| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Power Supply: | AC 380V |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
A. Introduction of test chamber
Benzene and toluene in formaldehyde and VOC are strong carcinogens recognized by WHO.
Long-term exposure to pollutants exceeding the standard concentration will seriously endanger people's health.
Testing and limiting the amount of pollutants released will help to improve product quality and protect people's health.
Wood products, furniture, floors, carpets, footwear products, building decoration materials, automotive interiors and other products in contact with the human body will volatilize VOC (volatile organic compounds), formaldehyde and other harmful substances to the human body, especially for products placed in intensive, space-closed indoor, car, the concentration will be accumulated,After accumulation, the concentration will be higher and the harm to human health will be greater.
This test chamber is an instrument used to simulate the release of VOC (formaldehyde) from products near people's living environment. It is used to test and evaluate the release of harmful substances in furniture, building materials, automobile interior and other products.
This test chamber provides a clean enclosed space (very low background concentration), does not appear liquid water (to prevent formaldehyde and other components easily absorbed by water to be measured), while controlling the temperature, humidity, wind speed, relative pressure, ventilation rate in the warehouse, which is used to simulate the pollutant release process of products in the environment similar to people's living environment. Through monitoring the concentration of pollutants in the warehouse, the release amount is determined to evaluate the environmental protection level of the products.
It is mainly used to detect the amount of formaldehyde and VOC released from interior decoration materials, decoration and decoration materials, wood-based panels, wood products, and other products. According to indoor pollutant data or prediction model, the indoor air quality is evaluated by comprehensive environmental indicators
GB 18580-2017Formaldehyde emission limits in wood-based panels and self products for interior decoration
GB 18584-2011Interior Decoration and Decoration Material - Limit of Hazardous Substances in Wood Furniture(in approval)
GB 18587-2001Indoor Decoration Materials - Carpets, Carpet Liners and Carpet Adhesives Harmful Substances Release LimitsAppendix A (Normative Appendix): Small Environmental Test Chamber Method.
GB 50325-2010Control specification for Indoor Environmental Pollution Control in Civil Building Engineering
GB/T 18584 General Technical Conditions for Climate Chamber for Detection of Volatile Organic Compounds in Furniture (Draft for Approval)
GB/T 28489-2012 Harmful Material Limit for Musical Instruments
GB/T29592-2013 GB/T 29592-2013Determination of Volatile Organic Compounds (VOC) and Aldehydes in Building Adhesives
LY/T 1980-2011 Volatile Organic Compounds and Formaldehyde Emission Detection chamber
LY/T 1981-2011 Detection chamber for formaldehyde emission gas analysis
JG/T 344-2011 Building Engineering Indoor Environment Test Chamber
HJ 571-2010 Technical Requirements for Environmental Marking Products Wood-based Panels and self Products
HJ/T 201-2005 Technical Requirements for Environmental Marking Products
Waterborne coatings
HJ/T 220-2005 Technical Requirements for Environmental Marking Products adhesive
HJ/T 414-2007 Technical Requirements for Environmental Marking Products Solvent-based Wood Coatings for Interior Decoration
international standard
ISO 16000-9-2006Determination of Volatile Organic Compounds Released from Building Products and Furniture-Laboratory Release Method
| Specification | |||
| 1 | Volume size | Workroom volume | 1000L±20L |
| Workroom | 850×1100×1080mm(Wide, Deep, High) | ||
| Appearance | Subject to reality | ||
| Gate (door) | 850×1080mm(Wide, High) | ||
| Observation window | 370×540mm(Wide, High) | ||
| 2 | Temperature | Temperature range | 10~40 ºC |
| Temperature fluctuation | <±0.3 ºC | ||
| Temperature deviation | <±0.5ºC | ||
| 3 | Humidity | Humidity range | 30~80% RH |
| Humidity fluctuation | ≤ ± 2% RH | ||
| Humidity deviation | ≤ ±2.5% RH | ||
| 4 | Backgroundvalue | Formaldehyde background value | ≤0.006 mg/m3 |
| Single VOC background | ≤0.002 mg/m3 | ||
| TVOC background value | ≤0.02 mg/m3 | ||
| 5 | Ventilation and sealing | Air exchange rate | 0.2~2.5 times/h |
| Center wind speed (adjustable) | 0.1~1.0 m/s | ||
| Tightness | a) When the positive pressure (gauge pressure) is 1kPa, the air leakage rate in the cabin is VL < 0.5% × cabin capacity/min; b) The air leakage rate in the cabin is VL<5%×air supply rate Vs. |
||
| Recovery rate | >80 % | ||
| Relative barotropic pressure maintained | 10±5 Pa | ||
| 6 | Material | Cabin material | SUS304 mirror stainless steel 1.5mm, round corner, full welding and polishing |
| Shell material | Q235A cold rolled steel plate 1.5mm, surface electrostatic spraying, white | ||
| Sealing material | Imported PTFE and fluororubber | ||
| The insulation material | 100 mm,High Density Polyurethane Foaming | ||
1.Q :How to provide after-sales service?
A:If customers need our engineers to come to the site for service, we will send out engineers to provide repair service for you.
2.Q: Can we visit and study in your factory?
A: Welcome to visit and study in our factory, we will show you our R&D and production capacity.
3.Q :Can I install and commission the calibration equipment on site?
A: Yes, we can send technicians and engineers to the customer's site for installation, commissioning and calibration.
4.Q: What are the transportation methods?
A :Air freight, sea freight, railroad transportation, all transportation methods according to the customer's needs.
5.Q : What are the packing methods?
A: Standard export wooden box packaging, solid and firm.
6.Q :How do you calibrate the equipment?
A: We have our own calibration and third-party calibration.
7.Q :What are the payment methods?
A :The payment methods are T/T, CIF, Paypal, L/C, VISA and so on.
8.Q :How long is the warranty period?
A :Warranty is 1 year, lifetime free service.
9.Q :What is the delivery time for your company's products?
A :This depends on the actual product you order, usually at least 30 days.
){kind=link}