Microcomputer tensile testing machine is suitable for rubber, paper, color printing, adhesive tape, luggage, textile, pharmaceutical, daily chemical, food, wire and electronics industries. It can test the physical properties of various materials and finished products and semi-finished products. Various kinds of fixtures can be used for tensile, compressive, tensile, holding, bending, tearing, peeling, adhesion, shearing and other tests.
Microcomputer tensile testing machine The company has completely changed the shortcomings of the traditional material testing machine, which is cumbersome, complicated in operation and single in performance. The structure adopts high-precision, low-resistance and gapless rolling screw with high-grade baking treatment. Guide column; measurement and control system data acquisition and operation speed is high, test results and curves can be printed by color liquid crystal or by printer. The product performance is stable and reliable, the measurement accuracy is high, and the operation is simple and easy to understand.
Technical specifications:
Microcomputer tensile testing machine
1. Capacity selection: one of 1, 2, 5, 10, 20, 50, 100, 200, 500kg;
2, display power and extension display force accuracy: better than±1.0% force resolution 1 / 10,000;
3. Effective force measurement range: 1~100% F.S deformation indication accuracy is better than ±1.0%;
4, test speed range; 5 ~ 500mm / min, can be arbitrarily set test maximum stroke maximum 650mm, (longer 1000mm) without fixture effective test space before and after 120mm, left and right ∝ power unit switch kgf, gf, N, kN, Ibf Change the stress unit MPa, kPa, kgf/cm2, Ibf/in2 deformation unit switch mm, cm, in stop mode upper and lower limit safety setting, emergency stop button, program strength and elongation setting, test piece damage sensing point Mode with manual pick-up and pre-set point 2
| Machine capacity |
2 kg, 5 kg, 10 kg, 20 kg, 50 kg, 100 kg, 200 kg, 500 kge |
| Test speed |
0.004-510mm/min keyboard input control |
| Multiple unit switching |
Kg, g, lb, n, kn, etc. |
| control method |
Variable frequency, stepping and servo can be fully automatic control (with automatic return origin) |
| Machine trip |
650mm (without fixture) Standard stroke 1000mm (including fixture) can be extended according to customer needs |
| Test width |
120mm |
| Machine weight |
About 70kg |
| Test accuracy |
<±0.5% |
| Force measurement |
Resolution 1 / 25000 accuracy 0.3%. |
| Load cell |
Load capacity 5N-5000KN, |
| Accuracy is |
0.5% |
| Comply with BS EN ISO 7500 Part 1 and ASTM E4. |
| For precision |
0.5% |
| The reading drops to 2% of the load range |
| And the reading drops to zero load |
1.Q :How to provide after-sales service?
A:If customers need our engineers to come to the site for service, we will send out engineers to provide repair service for you.
2.Q: Can we visit and study in your factory?
A: Welcome to visit and study in our factory, we will show you our R&D and production capacity.
3.Q :Can I install and commission the calibration equipment on site?
A: Yes, we can send technicians and engineers to the customer's site for installation, commissioning and calibration.
4.Q: What are the transportation methods?
A :Air freight, sea freight, railroad transportation, all transportation methods according to the customer's needs.
5.Q : What are the packing methods?
A: Standard export wooden box packaging, solid and firm.
6.Q :How do you calibrate the equipment?
A: We have our own calibration and third-party calibration.
7.Q :What are the payment methods?
A :The payment methods are T/T, CIF, Paypal, L/C, VISA and so on.
8.Q :How long is the warranty period?
A :Warranty is 1 year, lifetime free service.
9.Q :What is the delivery time for your company's products?
A :This depends on the actual product you order, usually at least 30 days.
){kind=link}