Vertical Thermal Shock Test Chamber

• After-sales Service: 1 Year
• Power Supply: AC 380V
• Certification: CE, TUV, ISO
• Warranty: 1 Year
• Temperature Shock Range: -65ºC~+150ºC
• Temperature Fluctuation: ≤±0.5
• Model NO.: HYTS-100C
• Temperature Deviation: ≤±2ºC
• Temperature Uniformity: ≤2ºC
• Temperature Conversion Time: ≤10s (Damper Opening Time)
• Temperature Recovery Time: ≤4min
• Transport Package: Standard Export Wooden Box
• Specification: Customized
• Trademark: HUANYI
• Origin: China
• HS Code: 8419899090
• Production Capacity: 10000pieces/Year

Product Description

Application

Three zones thermal shock chambers can be used to test the tolerance of products in the continuously changing temperature environment between two extreme temperatures. Through thermal shock testing, we can understand the failure of the product due to repeated changes in temperature.

Three zones thermal shock chambers are mainly composed of independent product testing area, high temperature heat storage area and low temperature storage area. In addition, there are auxiliary refrigeration units and electrical control cabinets.

Meet the standards

Three Zones Thermal Shock Chambers Test Standards
GB/T 2423.1-2008 (IEC68-2-1) Test Ab: low temperature test method.

GB/T 2423.2-2008 (IEC68-2-2) Test Bb: High temperature test method.

GJB360.8-2009 (MIL-STD.202F) High temperature life test.

GJBl50.3-2009 (MIL-STD-810D) High temperature test method.

GJBl50.4-2009 (MIL-STD-810D) Low temperature test method.

Features

1.Intelligent, energy-saving refrigeration design: Independent cold-side and hot-side PID regulation to reduce energy waste.
2.Prevent condensation and frost: High and low temperature resistant silicone rubber seal and door frame anti-condensation electric heating device.
3.Insulation layer material:Low -temperature zone: Rigid polyurethane foam insulation layer, flame retardant B2.High temperature zone: Glass fiber cotton insulation layer, flame retardant A1.
4.Solid and durable structure: High quality cold-rolled steel plate external chamber, the surface static powder paint. SUS304 stainless steel plate inner chamber.

Machine structure

The pre-cooling area, preheating area and test area are independent. The three boxes can be switched through the air door without moving the test product. When the room temperature is affected, the ambient temperature is introduced into the test space through the blower to eliminate the heat or cold in the test space. At the same time, The damper of the high and low temperature tanks is closed; when the low temperature is hit, the dampers of the high temperature and normal temperature tanks are closed, and the low temperature tank is connected to the test chamber, and the pre-stored cold energy is instantly introduced into the test chamber; when the high temperature is hit, the dampers of the low temperature and normal temperature tanks are closed, and the high temperature tank is connected to the test chamber. , instantly introducing the pre-stored heat into the test chamber. This achieves the purpose of rapid temperature changes.

Product Parameters

Main Specifications
Cabinet:
Studio size	ApproximatelyW 500 × H 450 × D 400 (mm) (W width × H height × D depth)
Dimensions	Approximately 1450×1800×1650(mm), subject to the actual object
Volume	100L;
Noise	Within 75dB (measured 1 meter from the front of the machine and 1.2 meters from the ground)
Temperature:
High temperature zone	Temperature range	RTºC~+200ºC
	Heating time	RT~+200ºC: about 30min
Low temperature zone	Temperature range	RT~-55ºC
	Cooling time	RT~-55ºC: about55min
Studio	Temperature shock range	-65ºC~+150ºC
	Temperature fluctuation	≤±0.5
	Temperature deviation	≤±2ºC
	Temperature uniformity	≤2ºC
	Temperature conversion time	≤10s(Damper opening time)
	Temperature recovery time	≤4min
Operation mode	There are two high and low temperature impact modes and high and low temperature + room temperature impact modes, which can be set by the human-machine interface.
High and low temperature shock mode	150ºC(30min)-NC--40ºC(30min)
High and low temperature + room temperature impact mode	150ºC(30min)-room temperature--40ºC(30min)
Power	High greenhouse power: 9KW Low temperature greenhouse power: 9KW Other power about: 2KW Maximum power about: 20KW Operating power approximately: 12KW
Voltage	Power requirements: 380V 50HZ three-phase five-wire system plus ground wire              Power: 20KW    Current 40A
Condensation method	Water cooling

Company Profile