SSD Solid State Drive Aging Chamber / Solid State Drive (SSD) Aging Test Chamber

• Customization: Available
• After-sales Service: 1 Year
• Power Supply: AC 380V
• Model NO.: HYHT
• Certification: CE, TUV, ISO
• Warranty: 1 Year
• Temperature Range: Rt+15ºC~100ºC
• Temperature Fluctuation: ±1ºC
• Temperature Uniformity: ±2ºC Without Load, ±5ºC
• Heating Rate: 5ºC/Min
• Time Setting: 0~9999h Can Be Set Arbitrarily
• Transport Package: Strong Wooden Case
• Specification: Customized
• Trademark: HUANYI
• Origin: China
• HS Code: 9013809000
• Production Capacity: 10000pieces/Year

Product Description

Product Description

SSD manufacturer have an immediate need for a test system that is able to test SSDs as standard generic drives, but to also test for unique SSD drive failure modes and attributes of the underlying solid state technology.

Whole Test System Functions

1. Support Maximum Simultaneous Measurable Quantity is 800 pieces.
2. 100 sets of PCB burn-in boards, each with 8 SSDs, that is, 800 pieces; divided into two turnover trolleys
3. Power supply AC/DC5V 1200W, power of each product: 5V, 5A
4. All SSD products are carried by the test trolley, which can be pulled out and separated from the test box; 2 turnover trolleys
5. Internal temperature hot air circulation, entering from the left and right sides, and returning air at the top of the middle
6. There are fully automatic fresh air inlets on the left and right sides. When the temperature of the product in the inner box exceeds the temperature, the middle exhaust fan is forced to exhaust the air.
7. There are 5 monitoring points for the temperature of the inner box, the upper, middle and lower parts are displayed locally, and the main control temperature point is 1
8. The product has 80 voltage monitoring points and 80 current monitoring points
 

Product Parameters

1. SSD RDT aging test chamber
The specific configuration is as follows:
1. Inner dimensions of oven	W1200×D350×H1200mm.
2. SSD RDT aging test chamber  dimensions	(The actual object shall prevail)
3. The box shell is made of δ1.5mm cold-rolled steel plate and is reinforced by bending and forming.
4. The inner liner and interlayer of the box are made of δ1.2mm galvanized steel plate by bending and forming.
5. The insulation layer of the box is filled with high-quality rock wool, with a thickness of 50mm.
6. The oven is equipped with double doors, and an observation window is designed on the door. It is equipped with a double-layer configuration of 8mm tempered glass and the size is about W350×H1000mm.
7. The bottom of the oven is equipped with an adjusting foot cup, one of which is equipped with 4 universal wheels.
8. There is an adjustable exhaust gas outlet on the top of the oven.
The oven circulates air using a Taiwan-made 1/2HP vertical motor and is equipped with a 9-inch reinforced multi-wing air fan. Wheel, designed to transport wind up and down.
10. The oven heating system uses high-quality stainless steel heating pipes with radiators, and the power is about 3.6KW.
11. The oven heating temperature is adjustable from room temperature to 80°C.
12. The oven temperature control adopts RKC digital display intelligent thermostat, and the over-temperature protection adopts mechanical thermostat.controller configuration.
13. The electrical box is designed with secondary temperature control, power indication, fault indication, time controller, andSet up over-temperature timeout audible alarm and automatic power-off control functions.
14. The circuit board, power supply and screws for fixing the circuit board that need to be installed in the aging box shall be provided by the purchaser.The supplier is responsible for installation and wiring.
15. After professional anti-rust treatment, the surface of the oven is treated with computer color oil paint.

 

Detailed Photos

Company Information

FAQ

1.Q :How to provide after-sales service?
A:If customers need our engineers to come to the site for service, we will send out engineers to provide repair service for you.

2.Q: Can we visit and study in your factory?
A: Welcome to visit and study in our factory, we will show you our R&D and production capacity.

3.Q :Can I install and commission the calibration equipment on site?
A: Yes, we can send technicians and engineers to the customer's site for installation, commissioning and calibration.

4.Q: What are the transportation methods?
A :Air freight, sea freight, railroad transportation, all transportation methods according to the customer's needs.

5.Q : What are the packing methods?
A: Standard export wooden box packaging, solid and firm.

6.Q :How do you calibrate the equipment?
A: We have our own calibration and third-party calibration.

7.Q :What are the payment methods?
A :The payment methods are T/T, CIF, Paypal, L/C, VISA and so on.

8.Q :How long is the warranty period?
A :Warranty is 1 year, lifetime free service.

9.Q :What is the delivery time for your company's products?
A :This depends on the actual product you order, usually at least 30 days.