After-sales Service: | 1 Year |
---|---|
Power Supply: | AC 380V 50Hz |
Certification: | CE, TUV, ISO |
Warranty: | 1 Year |
High Temperature Zone Temperature Range: | RtºC~+200ºC |
After-Sales Service:T1 Year Power Suppl: | Rt~+200ºC: About 30min |
Customization: |
---|
Suppliers with verified business licenses
This series of products are widely used in the aviation, aerospace, electronics, IT industries, instrumentation, electrical products and other simulated samples to test the adaptability of simulated samples under rapid changes in ambient atmospheric temperature and to provide reliability testing for the safety of electronic components. Product screening, etc.
GB/T2423.1-2008 Environmental testing of electrical and electronic products Part 2 Test methods Test A Low temperature
GB/T2423.2-2008 Environmental testing of electrical and electronic products Part 2: Test methods Test B: High temperature1. Use the internationally accepted energy storage method to conduct impact tests at hot and cold temperatures.
2. Touch-sensitive color LCD display human-machine interface controller, easy to operate.Main Specifications | ||
Cabinet | ||
Studio size | Approximately W 600 × H 750 × D 500 (mm) (W width × H height × D depth) |
|
Dimensions | Approximately 1550×2100×1750(mm) , subject to the actual product |
|
Volume | 225L; | |
Noise | Within 75dB (measured 1 meter from the front of the machine and 1.2 meters from the ground) | |
Temperature | ||
High temperature zone | Temperature range | RTºC~+200ºC |
Heating time | RT~+200ºC: about 30min | |
Low temperature zone | Temperature range | RT~-55ºC |
Cooling time | RT~-55ºC: about 55min | |
Studio | Temperature shock range | -65ºC~+150ºC |
Temperature fluctuation | ≤±0.5 | |
Temperature deviation | ≤±2ºC | |
Temperature uniformity | ≤2ºC | |
Temperature conversion time | ≤10s(Damper opening time) | |
Temperature recovery time | ≤4min | |
Operation mode | There are two high and low temperature impact modes and high and low temperature + room temperature impact modes, which can be set by the human-machine interface. | |
High and low temperature shock mode | 150ºC(30min)-NC--40ºC(30min) | |
High and low temperature + room temperature impact mode | 150ºC(30min)-room temperature--40ºC(30min) | |
Power | High greenhouse power: 9KW Low temperature greenhouse power: 9KW Other power about: 2KW Maximum power about: 20KW Operating power approximately: 12KW |
|
Voltage | Power requirements: 380V 50HZ three-phase five-wire system plus ground wire Power: 20KW current 40A |
|
Condensation method | Water cooling | |
Gross weight | 550KG |
Suppliers with verified business licenses