| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Power Supply: | AC 220V |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
It is mainly used for vehicle high and low temperature storage test, vehicle defrosting and defogging performance test, vehicle cold start performance test, vehicle heating and cooling performance test, vehicle thermal balance test, parts and components high and low temperature resistance test, etc. This product mainly consists of the main body of the climate simulation test chamber, the heating and cooling device, the fresh air/tail exhaust system, the sunlight simulation system, the temperature acquisition system in the warehouse, and the electrical control system.
DIN75220/CIE85, GB/T12535-2021, GB11556-1994, GB/T18297-2001 (reference), GB/T2423.24-2022, GB/T2423.3-2016GB/T12782-2022, QC/T658-2018.
Overall structure: The entire vehicle environmental test chamber has a three-dimensional layout of upper and lower layers. The lower layer is the environmental cabin and the upper layer is the circulating air duct. The wall structure: polyurethane assembled warehouse board with a thickness of 150mm. The outer surface is made of spray-coated colored steel plates (thickness 1.5 mm), the inner surface is made of stainless steel plate (SUS304 thickness 1.2mm). There is an insulating sealing tape on the edge of the warehouse board. After the assembly is completed, silicone sealant is applied, and the two warehouse boards are covered with stainless steel strips to rivet the two warehouse boards. Floor structure: The design structure is basically the same as the wall. In addition, an anti-slip layer and a pressure plate are added. The thickness of the anti-skid stainless steel material is >3mm, the ground bearing capacity is 1200kg/wheel, and the load-bearing treatment is strengthened within the moving range of the cooling fan: the basic structure of the equipment meets the needs of drum equipment insulation.
Net dimensions in the test chamber: Depends on actual usage.
Test warehouse door: vehicle access door, personnel access door with observation window.
Observation windows: Observation windows in the control room, observation windows on each door.
| Temperature range | -40°C~+60°C |
| Temperature control accuracy | ≤±1°ºC(static)/≤±1.5°ºC(dynamic) |
| Humidity range | 20~95%RH |
| Humidity control accuracy | ≤±3%RH |
| Irradiation intensity | 600~1200kW/m (infrared/full spectrum) |
| Irradiation distance | 1.5m-2.5m |
| Irradiation area (mm) | 6000X2500 |
| Datum height | 0.8-1.8m |
| Unevenness | <+10% |
| Spectral range | 280-3000nm |
| Power Factor | 0.98 |
| Light source stability | ≤+2% |
| Warehouse pressure | ±50Pa |
| Exhaust volume | >6000m'/h (at 25°C) |
){kind=link}