12 cubic meters of VOC release detection environmental chamber. Benzene, toluene, and other components in volatile organic compounds (VOCs) are recognized by the World Health Organization as strong carcinogens. Long term exposure to pollutants with excessive concentrations can seriously harm people's health. Testing and limiting the release of pollutants will be beneficial for improving product quality and protecting people's health.
Wood products, furniture, flooring, carpets, footwear products, building decoration materials, automotive interior materials, and other products that come into contact with the human body can emit harmful substances such as volatile organic compounds (VOC) and formaldehyde, especially for indoor and enclosed spaces where products are densely placed, the concentration will be higher after exposure, posing greater harm to human health.Product introduction: The applicable standard for the 12 cubic meter large environmental test chamber is ISO 12219-2-2012 Determination of Volatile organic compound Emission from Automotive Interior Trim Materials by Sieving -- Bag Method.
Application scope:
The 12 cubic meter VOC emission detection environmental chamber is mainly used to detect formaldehyde and VOC emissions in interior decoration materials, decoration materials, artificial boards, and their wood products; At the same time, other products can also be tested for VOC release. Comprehensive environmental indicator evaluation of indoor air quality based on indoor pollutant data or prediction models.
GB 18580-2001 Indoor Decoration Materials - Limits of Formaldehyde Emission from Engineered wood and Their Products GB 18584-2011 Indoor Decoration Materials - Limits of Harmful Substances in Wood Furniture (Appendix A (normative appendix) of the approved GB 18587-2001 Indoor Decoration Materials - Limits of Harmful Substances Emission from Carpets, Carpet Villages and Carpet Agents): small environmental test chamber method.
GB 50325-2010 Code for Indoor Waste minimisation of Civil Building Engineering
GB/T 18584 Climatic General-purpose technology Conditions for the Detection of Volatile organic compound in Furniture (Draft for Approval) GB/T 284-2012 Limits of Harmful Substances in Musical Instruments
ILY/T 1980-2011 Volatile organic compound and Formaldehyde Emission Test Chamber
ILY/T 1981-2011 "Detection Box for Formaldehyde Release Gas Analysis Method"
UG/T 344-2011 Indoor Environment Test Tire for Building Engineering
IHJ 571-2010 (Technical Requirements for Environmental Labeling Products Engineered wood and Products)
IHJ/T 201-2005 "Technical Requirements for Environmental Labeling Products - Waterborne Coatings"
IHJ/T 220-2005 "Technical Requirements for Environmental Labeling Products - Adhesives"
IHJ/T 414-2007 "Technical Requirements for Environmental Labeling Products - Solvent based Wood Coatings for Indoor Decoration and Decoration
| Model |
HYVW-12m³ |
| Ambient temperature |
5ºC-35ºC |
| Ambient humidity |
≤90R.H |
| Environmental cleanliness requirements |
No pollution sources around |
| Climate box volume |
3*2*2m(W*D*H) |
| Door |
1000*1800 |
| Temperature range |
20-100ºC High temperature cleaning 250ºC |
| Humidity range |
40-70R.H.(20-30ºC),According to VDA276, the temperature is 56 (at 65 ºC) |
| Pressure |
10±5pa |
| Temperature fluctuation |
±0.3ºC |
| Temperature deviation |
±0.5ºC |
| Humidity fluctuation |
±2.5R.H. |
| Humidity deviation |
±30R.H. |
| Air exchange rate |
0.2-5times/h(Optional with larger exchange rate specifications) |
| Power Supply |
AC380V/50Hz/Three-phase power supply 4/5-wire system |
| Starting power |
20kw |
| Operating power |
9kw |
| VOC background concentration |
Single VOC concentration less than 2ug/m3 Dust filtration TVOC concentration less than 20ug/m |
| Rate of recovery |
The recovery rate of formaldehyde, octanol, 4-phenylcycloethylene, dodecane, Tetradecane is more than 80% |
| Clean air system |
Standard configuration |
1.Q :How to provide after-sales service?
A:If customers need our engineers to come to the site for service, we will send out engineers to provide repair service for you.
2.Q: Can we visit and study in your factory?
A: Welcome to visit and study in our factory, we will show you our R&D and production capacity.
3.Q :Can I install and commission the calibration equipment on site?
A: Yes, we can send technicians and engineers to the customer's site for installation, commissioning and calibration.
4.Q: What are the transportation methods?
A :Air freight, sea freight, railroad transportation, all transportation methods according to the customer's needs.
5.Q : What are the packing methods?
A: Standard export wooden box packaging, solid and firm.
6.Q :How do you calibrate the equipment?
A: We have our own calibration and third-party calibration.
7.Q :What are the payment methods?
A :The payment methods are T/T, CIF, Paypal, L/C, VISA and so on.
8.Q :How long is the warranty period?
A :Warranty is 1 year, lifetime free service.
9.Q :What is the delivery time for your company's products?
A :This depends on the actual product you order, usually at least 30 days.
){kind=link}