Precision ovens are suitable for drying, heat treatment, sterilization, disinfection and moisturizing in scientific research institutions, colleges and universities, industrial and mining enterprises, laboratories, etc. They can also be used for general constant temperature tests, etc.
1. Furnace temperature measuring, instructions and automatic control.
2. With simple operation, the temperature control precision higher characteristic.
3. Attached with two sets of movable desired to be adjusted high and low at your display.
4. The thermostat: PID microcomputer control, automatic constant temperature, temperature quickly compensation function.
Temperature Control System
1. The temperature control is a PID microcomputer, which can automatically calculate, PV/SV can be displayed simultaneously, and can be set by button setting to any temperature value between normal temperature and the highest temperature (Taisong);
2. Timer setting, 99.9 seconds - 999 hours (optional setting of hours, minutes, seconds, Taiwan Yang Ming)
a. Continuous use, b. When the temperature reaches the timer, the heating current is cut off when the time is up (end alarm device)
3. When the temperature is up, the heating current will be cut off (alarm device)
4. Temperature sensing input CA (K) TYPE temperature sensing head (Taiwan Shenjie);
5. Output is 3-32V;
6. The current controller controls the power output by a solid-state relay and the temperature-controlled PID microcomputer contact output. The signal automatically adjusts the output ratio and can accurately control the overshoot accuracy of the temperature (Taiwan Yangming);
7. The heating material is stainless steel heater (Swedish high temperature wire);
Technical Parameters |
Internal dimensions |
600(W)×900(H)×500(D)mm |
External dimensions |
820(W)×1590(H)×680(D)mm The actual product shall prevail. |
Temperature range |
RT+20~200ºC |
Control precision |
±1ºC; |
Temperature uniformity |
±2.0ºC(no load) |
Heating rate |
RT~100ºC for about 10 minutes; |
Power supply |
220V single phase, power 3KW, current 18A |