The mold test chamber is a type of incubator. It is mainly used to cultivate organisms and plants. It sets the corresponding temperature and humidity in a closed space so that mold can grow out in about 4-6 hours. It is used to artificially accelerate the propagation of mold and is used to assess electricians. Anti-mold ability and degree of mold in electronic products. It is an important detection method in artificial three-proof climate. It is a necessary testing equipment for bacteria storage and biological culture in colleges and universities, medicine, industry, electronics, chemical industry, and biological research departments. It is also a necessary testing equipment for scientific research laboratories. Used to test and judge its parameters and performance after changes in hot and humid temperature environments.
Applicable standards
GB10592-89 High and low temperature test chamber technical conditions
GB10586-89 Technical conditions for heat and humidity test chamber
GB2423.1-2001 Test A High Temperature Test Method
GB2423.3-93 test Ca constant damp heat test method
GB2423.16-93 test mold growth test method
Instrument selling points:
1. The inner tank is made of 304 stainless steel.
2. Intelligent controller with good temperature control effect;
3. Digital one-screen display, temperature, time and other parameters
4. Manufactured by an honest enterprise, the products are durable and the parameters are presented without reservation.
Mold culture test chamber unique advantages:
Partition upgrade: (The partition is made of stainless steel plate punching, which can solve the problem of uneven grid placement in the past)
Appearance upgrade: (While completing the overall performance improvement of the device, the appearance is upgraded to be exquisite and grand.)
UV lamp: (standard equipped with UV germicidal lamp)
Socket: (standard built-in 220V socket, available for BOD tester)
Control System
Temperature, humidity, alternation and mold are completely independent systems;
The temperature and humidity control output power is calculated by a microcomputer to achieve high-precision and high-efficiency power consumption;
External boiler steam humidifier;
Humidity control adopts P.I.D+S.S.R, and the system coordinates control on the same channel;
The temperature and humidity control instrument adopts an imported large screen (7.0-inch LED display). The screen operation is simple and the program editing is easy. No key input is required, and the screen directly touches the options;
The return air outlet of this test chamber has an automatic defrosting device so that the water vapor generated during the test will not accumulate on the refrigeration evaporator and cause ice blockage
| Brand |
HUANYI |
| Temperature range |
20°C~80°C |
| Temperature uniformity |
<2°C (no load) |
| Temperature fluctuation |
0.5°C (no load) |
| Time setting range |
1~60000M |
| Humidity range |
45%~98%RH |
| Humidity uniformity |
+2%-3% RH |
| Humidity fluctuations |
+2% |
| Heating rate |
1.0~3.0°C/min |
| cooling rate |
0.7-1.0°C/min |
| Wind speed |
<1m/s |
| Best growing environment |
Temperature: 25°C~29C Humidity: 95% |
| Observation window |
210x275mm or 395x395mm (effective field of view) |
| Outer chamber material |
High quality A3 steel plate electrostatic spraying |
| Inner chamber material |
High quality stainless steel SUS304 |
| Insulation material |
Rigid polyurethane foam + glass fiber |
| Temperature and humidity controller |
Imported brand temperature and humidity meter |
| Temperature and humidity sensor |
PT100 platinum resistance thermometer |
| Refrigeration method |
Single machine refrigeration |
| Compressor |
French Taican |
| Power |
4.0kW 5.5kw/6.5kW 8.5kW 9.5kw |
1.Q :How to provide after-sales service?
A:If customers need our engineers to come to the site for service, we will send out engineers to provide repair service for you.
2.Q: Can we visit and study in your factory?
A: Welcome to visit and study in our factory, we will show you our R&D and production capacity.
3.Q :Can I install and commission the calibration equipment on site?
A: Yes, we can send technicians and engineers to the customer's site for installation, commissioning and calibration.
4.Q: What are the transportation methods?
A :Air freight, sea freight, railroad transportation, all transportation methods according to the customer's needs.
5.Q : What are the packing methods?
A: Standard export wooden box packaging, solid and firm.
6.Q :How do you calibrate the equipment?
A: We have our own calibration and third-party calibration.
7.Q :What are the payment methods?
A :The payment methods are T/T, CIF, Paypal, L/C, VISA and so on.
8.Q :How long is the warranty period?
A :Warranty is 1 year, lifetime free service.
9.Q :What is the delivery time for your company's products?
A :This depends on the actual product you order, usually at least 30 days.
Audited Supplier 
){kind=link}