| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Power Supply: | AC 380V |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
PCT saturated accelerated life test chamberEquipment purpose:It mainly tests the moisture capacity of semiconductor packaging. The product to be tested is tested under harsh temperature, humidity and pressure. Moisture will penetrate into the package along the colloid or the interface between colloi
PCT saturated accelerated life test chamber
It mainly tests the moisture capacity of semiconductor packaging. The product to be tested is tested under harsh temperature, humidity and pressure. Moisture will penetrate into the package along the colloid or the interface between colloid and conductor frame. The common failure modes are open circuit caused by corrosion in active metallization area, or short circuit caused by pollution between package pins, etc. PCT is mainly used to test the moisture capacity of semiconductor packaging. The products to be tested are tested under harsh temperature, humidity and pressure. Moisture will penetrate into the package along the colloid or the interface between colloid and wire frame. PCT high-pressure cooking test box is suitable for national defense, aerospace, automotive parts, electronic parts, plastics, magnet industry, pharmaceutical circuit board, multilayer circuit board, IC, LCD, magnet For the inspection of sealing performance of lighting products, lighting products and other products, the related products shall be subject to accelerated life test, which shall be used in the product design stage to quickly expose the defects and weak links of the products and test the wearability and air tightness of the products.
Product features of PCT saturation accelerated life test chamber
1. The round inner box and stainless steel round test inner box structure meet the industrial safety container standard and can prevent condensation and dripping during the test.
2. The round width lining and stainless steel round width lining design can avoid the direct impact of steam latent heat on the test object.
3. Precision design, good air tightness and low water consumption. Each time water is added, it can last for 200H.
4. Automatic access control, automatic temperature and pressure detection of round door, safety access control and locking control, patented safety door handle design. When there is more than atmospheric pressure in the box, the testers will be protected by back pressure.
5. Patented packing. When the pressure in the box is greater, the packing will have back pressure, which will make it more closely combined with the box. It is completely different from the traditional extrusion type and can prolong the service life of packing.
6. The vacuum action before the experiment can extract the air in the original box and inhale the new air filtered by the filter core (partial < 1micon). To ensure the purity of the box.
7. Critical point limit mode automatic safety protection, abnormal cause and fault indicator display.
PCT saturation accelerated life test chamber equipment implementation and compliance with standards
1. GB / t10586-1989 technical conditions for damp heat laboratory
2. Gb2423.3-93 (iec68-2-3) constant damp heat test
3. Mil-std810d method 502.2
4. Gjb150.9-8 temperature and humidity test
5. Gb2423.34-86, mil-std883c method 1004.2 temperature, humidity and high pressure combined cycle test.
Specification of PCT saturation accelerated life test chamber
| Item/Model | HY-PCT-250 | HY-PCT-350 | HY-PCT-450 | HY-PCT-650 |
| Inner Size(mm)(W x H x D) | 250*300 | 350*400 | 450*500 | 650*600 |
| Outer Size(mm)(W x H x D) | 500*450*650 | 600*550*750 | 700*650*850 | 700*650*850 |
| Material(Inner) |
Stainless steel #304
|
|||
| Material(Outer) | Powder | |||
| Temperature Range | +100ºC-132ºC(Optional: up to 145ºC) | |||
| Structure | Standardized pressure vessels | |||
|
Humidification System
|
Electric heating tube | |||
| Humidification Water Supply | Manual filling(automatic filling) | |||
| Pressure Range | 0-2kg/mm²(Optional: up to 3kg/mm²) | |||
| Power Supply | 220V-240V 50/60HZ Single Phase | |||
| Operating Temperature | 121ºC/132ºC | |||
| Temperature Uniformity | ±1.5ºC | |||
| Operating Maximum Pressure | 2.0Kg/mm², Can withstand high oxygen pressure of more than 6ATM |
|||
| Temperature Controller | Adopt PID microcomputer temperature controller | |||
1.Q :How to provide after-sales service?
A:If customers need our engineers to come to the site for service, we will send out engineers to provide repair service for you.
2.Q: Can we visit and study in your factory?
A: Welcome to visit and study in our factory, we will show you our R&D and production capacity.
3.Q :Can I install and commission the calibration equipment on site?
A: Yes, we can send technicians and engineers to the customer's site for installation, commissioning and calibration.
4.Q: What are the transportation methods?
A :Air freight, sea freight, railroad transportation, all transportation methods according to the customer's needs.
5.Q : What are the packing methods?
A: Standard export wooden box packaging, solid and firm.
6.Q :How do you calibrate the equipment?
A: We have our own calibration and third-party calibration.
7.Q :What are the payment methods?
A :The payment methods are T/T, CIF, Paypal, L/C, VISA and so on.
8.Q :How long is the warranty period?
A :Warranty is 1 year, lifetime free service.
9.Q :What is the delivery time for your company's products?
A :This depends on the actual product you order, usually at least 30 days.
){kind=link}