Low Power Consumption Thermal Shock Test Chamber

• Customization: Available
• After-sales Service: 1 Year
• Power Supply: AC 380V 50Hz
• Model NO.: HYTS-408C
• Certification: CE, TUV, ISO
• Warranty: 1 Year
• High Temperature Zone Temperature Range: RtºC~+200ºC
• After-Sales Service:T1 Year Power Suppl: Rt~+200ºC: About 30min
• Temperature Shock Range: -65ºC~+150ºC
• Low Temperature Zone Temperature Range: Rt~-55ºC
• Temperature Fluctuation: ≤±0.5
• Cooling Time in Low Temperature Zone: Rt~-55ºC: About 55min
• Transport Package: Standard Export Wooden Box
• Specification: Customized
• Trademark: HUANYI
• Origin: China
• HS Code: 8514199000
• Production Capacity: 10000pieces/Year

Product Description

Product Description

This machine is suitable for aerospace product,electronic prod-ucts,vehicle metals,various electronic components, wires and cables,etc., machine is mean to test the performance indicators and quality management under high and low rapid alternating environment.
 

Features

1. Perfect appearance and easy to operate.
2. Programmable program: maximum 1,000 groups, time setting: 32,000 hours and 59 minutes per section, repeatable command execution: each command can be cycled up to 32,000 times
3. Two chamber structures, high temperature chamber and low temperature chamber, control automatically, stay and switch time adjustable.
4. Perfect protection alarm functions: short-circuits, Leakage, over temperature of work chamber; compressor over pressure, over load, short water
5. Control interface will display alarm reason and provide check methods, machine has emergency stop button.
6. Cold and hot shock temperature recover within1 minute, which complies with MTL, IEC, JIS, GJB and other international standards.
 

Machine structure

The precooling zone, preheating zone, and test zone are independent. The three boxes can be switched through the air door without moving the test product. When the room temperature is affected, the ambient temperature is introduced into the test space through the blower to eliminate the heat or cold in the test space. At the same time, The damper of the high and low temperature tanks is closed; when the low temperature is hit, the dampers of the high temperature and normal temperature tanks are closed, and the low temperature tank is connected to the test chamber, and the pre-stored cold energy is instantly introduced into the test chamber; when the high temperature is hit, the dampers of the low temperature and normal temperature tanks are closed, and the high temperature tank is connected to the test chamber. , instantly introducing the pre-stored heat into the test chamber. This achieves the purpose of rapid temperature changes.
 

Product Parameters

Main Specifications
Cabinet
Studio size	Approximately W 800 × H 850 × D 600 (mm)(W width × H height × D depth)
Dimensions	Approximately 1750×2200×1850(mm), subject to the actual product
Volume	408L;
Noise	Within 75dB (measured 1 meter from the front of the machine and 1.2 meters from the ground)
Temperature
High temperature zone	Temperature range	RTºC~+200ºC
	Heating time	RT~+200ºC: about 30min
Low temperature zone	Temperature range	RT~-55ºC
	Cooling time	RT~-55ºC: about 55min
Studio	Temperature shock range	-65ºC~+150ºC
	Temperature fluctuation	≤±0.5
	Temperature deviation	≤±2ºC
	Temperature uniformity	≤2ºC
	Temperature conversion time	≤10s(Damper opening time)
	Temperature recovery time	≤4min
Operation mode	There are two high and low temperature impact modes and high and low temperature + room temperature impact modes, which can be set by the human-machine interface.
High and low temperature shock mode	150ºC(30min)-NC--40ºC(30min)
High and low temperature + room temperature impact mode	150ºC(30min)-room temperature--40ºC(30min)
Power	High greenhouse power: 9KW Low temperature greenhouse power: 9KW Other power about: 2KW Maximum power about: 20KW Operating power approximately: 12KW
Voltage	Power requirements: 380V 50HZ three-phase five-wire system plus ground wire Power: 20KW current 40A
Condensation method	Water cooling
Gross weight	550KG

Company Profile

 

FAQ

(1) Do you accept customized services?
Yes, of course, we can not only offer standard machines, but also can customize machines according to your requests. Don't hesitate to tell us your requirements, we will try our best to meet your needs.
(2) How about your warranty?
Every machine produced in our factory comes with a 14-month warranty after shipment. Generally, we offer 12 months of FREE maintenance, while considering of shipping time, we can extend for 2 months for our customers.
If your machine doesn't work, you can email us and we will try to find the problem via email or skype video chat if necessary. After confirming the problem, we can send you new instrument accessories or provide on-site maintenance.
(3) What's the delivery term?
At most of time, we have stock in the factory. If there is no stock, normally, the delivery time is 15-20 working days after deposit receipt. If you are in urgent need, we can consider making a special arrangement for you.
(4) How to install and use the product?  
We will email you operating instructions and videos in English, or you can download it directly from our official website.
Most of our machines are already a complete part when shipped, which means that they have already been installed, you only need to connect the power cable and can start to use them. If possible, we can also install your machine on site.
(5) Are your company a trading one or a factory?
We are an industry and trade integrated company, engaged in the research and development and production of test instruments, self-produced and self-marketing, the Foreign trade Department was established in 2007, OEM is also acceptable to us.
(6) How to choose the most suitable products?
Our professional team will give you the best advice, as long as you tell us what kind of testing you need to do and the required specifications.
(7) What is the order process?
Inquiry-Quotation-Communication-Order confirmation-Deposit-Production-Testing and debugging-Balance-Packaging-Shipment-Customer reception-After-sales service
(8) Can we visit your factory before order?
Yes, we warmly welcome and sincerely invite you or your team to visit our factory, we can help to arrange hotel and pick you up at the airport.
(9) How about the packing for machine, is it safely protected during transportation?
Testing Chamber is packed by standard export wooden box for outside package and stretch film for inner package, it won't be damaged. We've delivered many testing machines abroad by sea or by air without damage.