Programmable Three Zones Thermal Shock Chamber Air to Air Hyts-64

• After-sales Service: 1 Year
• Power Supply: AC 380V 50Hz
• Certification: CE, TUV, ISO
• Warranty: 1 Year
• High Temperature Zone Temperature Range: RtºC~+200ºC
• After-Sales Service:T1 Year Power Suppl: Rt~+200ºC: About 30min
• Model NO.: HYTS-64
• Temperature Shock Range: -65ºC~+150ºC
• Low Temperature Zone Temperature Range: Rt~-55ºC
• Temperature Fluctuation: ≤±0.5
• Cooling Time in Low Temperature Zone: Rt~-55ºC: About 55min
• Transport Package: Standard Export Wooden Box
• Specification: Customized
• Trademark: HUANYI
• Origin: China
• HS Code: 8514199000
• Production Capacity: 10000pieces/Year

Product Description

Introduction

This series of products are widely used in the aviation, aerospace, electronics, IT industry, instruments, electrical products and other analog test products under the conditions of rapid changes in ambient atmospheric temperature adaptability test, reliability test and product screening for the safety test of electronic components, etc.

Meet the standards

GB/T2423.1-2008 Environmental testing of electrical and electronic products Part 2 Test method Test A Low temperature

GB/T2423.2-2008 Environmental testing of electrical and electronic products Part 2: Test method Test B: High temperature
GB/T2423.22-2012 Environmental Test Part 2: Test Method Test N: Temperature Change
GJB150.5-2009 Mil equipment environmental test method Temperature shock test
GJB150.5A-2009 Mil Equipment Laboratory Environmental Test Method Part 5: Temperature Shock Test
GJB360B-2009 Test methods for electronic and electrical components
GB/T2423.1-2008/IEC6008-2-1-2007 Environmental testing of electric and electronic products Part 2: Test method Test A: Low temperature
GB/T2423.2-2008 Environmental testing of electrical and electronic products Part 2: Test method Test B: High temperature
GB/T10589-2008 Technical conditions of low temperature test chamber
Technical conditions of GB/T11158-2008 high temperature test chamber
IEC68-2-14 Test method N: Temperature change

Features

Description of product features

The internationally accepted energy storage method is used to carry out the cold and hot temperature impact test.
Touch control color LCD display man-machine interface controller, easy to operate.
Graphic function display, abnormal or fault display and troubleshooting method description.
The temperature control precision is high, all adopt PID automatic calculation control.
The air volume is evenly distributed to ensure even test exposure.
It has an appointment start function, and the impact method can be selected (high temperature first or low temperature first.)
The number of cycles and automatic defrosting can be set.

Product Parameters

Technical Specification
Interior	About W 400 × H 400 × D 400 (mm) (W width × H height × D depth)
external	Subject to actual size
Volume	64L
Noise	Within 75db (measured at 1 meter from the front of the machine and 1.2 meters from the ground)
Working tank temperature range	-55ºC-125ºC
High temperature tank temperature range	20ºC∽+150ºC High temperature exposure time 30 min
heating time	Room temperature to 150ºC, about 30min
Low temperature tank temperature range	-70ºC∽0 ºC Low temperature exposure time 30 min
Cooling time	50min(room temperature to -70ºC):
Temperature fluctuation	0.2ºC
Temperature deviation	1.0ºC
High and low temperature recovery time:	5min (under non-linear no-load)
High and low temperature conversion time:	≤10S
Test weight	5KG
control precision	Temperature fluctuation: <=0.5ºC; temperature deviation: ±2
power	High-temperature greenhouse heating: 9KW; low-temperature greenhouse heating: 4.5KW; maximum power: 25KW
Voltage	Power requirements: 380V 50HZ three-phase five-wire system plus grounding wire; power: 25KW, current 47A
compressor	Refrigeration compressor: 2 sets of 6HP
Condensation method	Air-cooled
total weight	450KG
Temperature rise and fall rate	Heat storage zone heating time: from room temperature to 150°C, about 30 minutes (non-linear no-load: about 3°C/min); cold storage zone cooling time: from room temperature to -40°C, about 50 minutes (non-linear no-load: about 1ºC/min)

Company Profile