| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
It is suitable for testing the wear resistance of stroller wheels. The stroller is placed on the testing machine with a certain load and the road conditions are simulated. There are small inclined impact blocks and obstacle blocks attached to the belt.
This machine is made according to the CNS hand push stroller dynamic durability test specification. The test method is as follows: the model baby is placed in the platform, the platform is fixed on the test bench, and the conveyor speed is adjusted to 1.4±0.1 m/sec (5 kw/h±3.6 kw/h). After 64 hours of continuous testing, visually check the platform for damage. The set number of times can automatically stop the operation. This machine is equipped with an electric eye safety device to prevent the baby carriage from losing control and damaging the test machine due to the break of the handle and the rubber band ring. This machine is suitable for the dynamic durability test of the bottom wheel and the car body when the push-type stroller simulates road conditions.AS/NZS2088:2000, ASTM-F833, CNS 6263-11, BSL-1996, EN1888: 2003, etc.
| model | HY-802 |
| Drum speed | 1~5km/h adjustable |
| Machine size approx. | 2500x1300x1400mm (single station |
| Load weight | Max:70 pounds |
| A fixed way | The railings can be adjusted up, down, left and right |
| Protective device | Stroller automatically stops when moving |
| Obstacle block height | 12mm and R25mm (aluminum alloy |
| Control method | Touch screen PLC control |
| Physical dimension | 2500x1300x1400(WxDxH)mm |
| Machine weight | About 800KG |
| Using electric | AC 380V/15A or specified |
| Experimental work | Single seat body |
| Test speed | 5KW/H to 0.1KW/H (adjustable) |
| Speed adjustment range | 0~6KW/H |
| Drive mode | The canvas rubber conveyor belt is driven by rollers and reinforced by rollers to move the special aluminum alloy conveyor belt. |
| Drum outer diameter | 300MM |
| Transmission belt | PVC thickness 7MM |
| Driving horsepower | AC380V 3HP |
| Up and down pitch adjustment | MAX300MM |
| effective width | MAX1000MM |
| Carrying load | MAX50KG |
| Local power supply | AC380V 50HZ 2.5KW |
| Impact block shape | Trapezoidal, semi-arc or specified |
| Safety protection | It has an infrared induction automatic shutdown function if the test product falls off the transmission belt. |
| Handle design | All stainless steel design, weight is 2.6KG, the handle and the machine support yellow rod are connected by the transmission shaft, which does not cause wear |
| Handle fixed crossbar diameter | 32MM |
| Belt | There are safety protection designs on both sides of the belt to ensure there is no gap between the belt and both sides of the machine |
| Control method | It adopts touch screen control, easy to operate, and displays actual data through encoder signals. |
| Gear lever | There are safety protection gear rods (section: 35*35MM) all around. The gear rods are made of hard aluminum alloy to ensure maximum safety. |
){kind=link}