Centrifugal Constant Acceleration Tester (Arm Type)
Centrifugal constant acceleration tester is used to test articles under extreme acceleration conditions based on standard like MIL-STD-810F, MIL-STD-202 and IEC68-2-7.
It is most suitable for testing electronic components or devices. Under high g effect on microcircuits, to check adaptability and reliability of wiring and the internal structures. It may expose mechanical and structural defects that are not found with vibration and shock tests.
Advanced control system: Full-automatic computer remote real-time control interface. The operator only needs to input simple values to start the equipment and complete the acceleration test accurately.
User-friendly display interface: the control interface can display the test curve, tolerance and test time in real time.
Powerful multi-acceleration continuous test system: It can realize multi-level acceleration continuous test according to the different requirements of the test sample.
Reliable protection measures: open circuit, over-limit and over-speed protection can be realized.
Multiple control methods: In the case of automatic control failure or no need of automatic control, the device can still use manual control to complete the test.
The dual-mode operation of computer control and manual control is convenient, and the test results can be stored and printed.
The software can realize single-stage and multi-stage (1-10 points continuous crossover) acceleration test control at one time.
Centrifugal dynamic overload testing machine is a means of simulating dynamic centrifugal motion for national defense enterprises to test the anti-G performance of equipment and components. It is mainly used for the dynamic structural integrity and adaptability test of components, small parts and small aircraft on the aircraft.
1.Computer real-time control, automatic generation of test reports;
2.Display test curve, tolerance and test time in real time.
3.It can achieve multistage accelerated test.
4.It can realize automatic and means control.
5.The number and size of current channel can meet any test requirements.
| Model |
HYZD-20 |
HYZD-100 |
HYZD-100 |
HYZD-200 |
HYZD-500 |
HYZD-1000 |
| name |
20kgArm Rotating Centrifuge |
5 0kg Centrifuge |
100kg Centrifuge |
200kg Centrifuge |
500kg Centrifuge |
1000kg Centrifuge |
| Unilateral maximum load kg |
20 |
50 |
100 |
200 |
500 |
1000 |
| Acceleration m/s2 |
20 ~1000 |
20 ~1000 |
20 ~1000 |
25 ~2500 |
20 ~1000 |
20 ~500 |
20 ~500 |
| Maximum size of sample mm |
200X200X200 |
300X300X200 |
450X450X400 |
700X700X700 |
1000X1000X1000 |
| Sample center installation radius |
600 |
750 |
1500 |
2500 |
3000 |
3500 |
| The starting time m i n |
≤5 |
≤8 |
≤10 |
| Continuous working time min |
60 |
30 |
| Power supply and consumption power |
AC380V 10KVA |
AC380V 40KVA |
AC380V 40KVA |
AC380V 55KVA |
AC380V 120KVA |
AC380V 250KVA |
| Electrical connection device |
30 ring 500V 5A |
| Host Outward (LXWXH)mm |
1800X1500X1200 |
4X2500X1400 |
4X4000X1400 |
4X6000X1600 |
4X7000X1600 |
4X8000X1800 |
| Control box Outline size mm |
850X1000X1300 (frequency converter cabinet100kg and below:600X600X1800, Above 100kg:1200X600X2100) |
| Weight kg |
800 |
2800 |
3000 |
3500 |
6000 |
8000 |
10000 |
| Control system |
IPC control |
| Meet standard |
GJB150 GJB360 GJB548 GB/T423 MIL-STD-202F MIL-STD-810F MIL-STD-883C IEC68-2-27 |
| Remarks |
Electricity connection device can be configured according to user's requirement. Rotary arm size can be manufactured according to user's test size according to relevant standards, and the base map can be provided to users separately. |
){kind=link}