| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Power Supply: | AC 380V |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The double-layer explosion-proof test chamber is used to test the heat resistance, cold resistance, dry resistance and explosion-proof protection performance of various batteries. Applicable to batteries, electronics, electrical appliances, communications, instruments, vehicles, rubber and plastic products, metal materials, food, medicine, chemical building materials, aerospace, ships, weapons, colleges and universities, scientific research units, etc.
A. This tester is used to test the overcharge and over-discharge of the battery.
B. The testing machine is divided into three floors and three testing rooms.GB/T2423.1-2008, IEC60068-2-1:2007 low temperature test method GB/T2423.22-2016, IEC60068-2-2:2007 high temperature test method
GJB150.3A-2009 high temperature test
CJB150.4A-2009 low temperature test
GB/T31485-2015 Safety requirements and test methods for power batteries for electric vehicles
| Structure | The test chamber is designed as an integral structure with two upper and lower studios. |
| Temperature range | B series:-20°C-+150C C series:-40C-+150C D series:-70C-+150C |
| Temperature fluctuation | +0.3C |
| Air supply method | Forced internal circulation, horizontal air supply over the entire surface (or patio air supply) |
| Heating rate | Average 1~3C/min throughout the process (non-linear no-load) |
| cooling rate | Average 1.0C/min throughout the process (non-linear no-load) |
| Temperature uniformity | ≤2C (no load, constant state) |
| Temperature deviation | +1.0°C |
| Observation window | W300XH400MM three-layer vacuum tempered glass |
| Test binding posts or lead holes | There are 12 sets of binding posts installed inside and outside the left side of the box to connect to the test cabinet or lead holes are optional. |
| Cooling method | Air cooling/water cooling optional |
| Compressor | French Taican compressor, American Copeland compressor or German Blog compressor |
| Control method | The touch screen can be programmed to control PLC, with USB interface and RS485 interface, which can be connected to special network control software for computer control to facilitate remote monitoring and data collection. |
| Internal material | SUS304# mirror stainless steel, 1.0MM thick,sprayed for insulation |
1.Q :How to provide after-sales service?
A:If customers need our engineers to come to the site for service, we will send out engineers to provide repair service for you.
2.Q: Can we visit and study in your factory?
A: Welcome to visit and study in our factory, we will show you our R&D and production capacity.
3.Q :Can I install and commission the calibration equipment on site?
A: Yes, we can send technicians and engineers to the customer's site for installation, commissioning and calibration.
4.Q: What are the transportation methods?
A :Air freight, sea freight, railroad transportation, all transportation methods according to the customer's needs.
5.Q : What are the packing methods?
A: Standard export wooden box packaging, solid and firm.
6.Q :How do you calibrate the equipment?
A: We have our own calibration and third-party calibration.
7.Q :What are the payment methods?
A :The payment methods are T/T, CIF, Paypal, L/C, VISA and so on.
8.Q :How long is the warranty period?
A :Warranty is 1 year, lifetime free service.
9.Q :What is the delivery time for your company's products?
A :This depends on the actual product you order, usually at least 30 days.
){kind=link}