| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. This equipment consists of the main body of the refrigeration compressor, a heating device, an electronic control box, a cooling tank, a cooling medium circulation system, an automatic alarm device and other parts. After the refrigeration switch is turned on, the compressor starts working and the refrigeration system enters the formal working state. The refrigeration compressor works continuously. When it approaches the set temperature, the heating device in the cooling tank begins to provide heat in proportion to balance the excess cold generated by the refrigeration system to achieve the purpose of constant temperature. Stirring can make the cooling medium in the cooling tank circulate continuously to make the temperature uniform.
2. Sample holder
Rubber: A sample can hold up to 5 at a time, generally not more than 4;
Plastic: A sample can hold 15 at a time, and B sample can hold 5 at a time.
3. Impact device
The impact device consists of an impact hammer and a self-locking mechanism.
4. Impactor
4.1 Rubber
a) The radius of the impact head is 1.6±0.1mm;
b) During impact, the gap between the impact head and the sample holder is 6.4±0.3mm;
c) The distance between the center line of the impact head and the sample holder is 8±0.3mm.
4.2 Plastic
4.2.1 Sample A:
a) The radius of the punch is 1.6±0.1mm;
b) The radius of the jaws is 4.0±0.1mm;
c) The gap between the center line of the punch and the fixture is 3.6±0.1mm;
d) The gap between the outer side of the punch and the fixture is 2.0±0.1mm
4.2.2 Sample B:
a) The radius of the punch is 1.6±0.1mm;
b) The gap between the center line of the punch and the fixture is 7.87±0.25mm;
c) The gap between the outer side of the punch and the fixture is 6.35±0.25mm
| Temperature control range | -70ºC (room temperature ≤ 25ºC) (there are three models of -60, -70, -80ºC for customers to choose) |
| Cooling speed | 0ºC ~ -20ºC 1.2ºC/min -20ºC ~ -30ºC 1.0ºC/min -30ºC ~ -60ºC 0.7ºC/min -40ºC ~ -60ºC about 0.7ºC/min -60ºC ~ -70ºC about 0.5ºC/min Note: The operating environment is used at room temperature (23-25ºC). The compressor heat dissipation effect is maintained during operation, and the side doors can be fully opened. |
| After constant temperature, the temperature fluctuation within 3 minutes of the test: <±0.5ºC | |
| Maximum dimensions | 900×505×800mm (length×width×height) |
| Studio dimensions | 220×170×70mm (length×width×height) |
| Cooling medium | ethanol or other antifreeze |
| Stirring motor | 15W |
| Working power supply | 220V~240V, 50Hz, 2kW |
1.Q :How to provide after-sales service?
A:If customers need our engineers to come to the site for service, we will send out engineers to provide repair service for you.
2.Q: Can we visit and study in your factory?
A: Welcome to visit and study in our factory, we will show you our R&D and production capacity.
3.Q :Can I install and commission the calibration equipment on site?
A: Yes, we can send technicians and engineers to the customer's site for installation, commissioning and calibration.
4.Q: What are the transportation methods?
A :Air freight, sea freight, railroad transportation, all transportation methods according to the customer's needs.
5.Q : What are the packing methods?
A: Standard export wooden box packaging, solid and firm.
6.Q :How do you calibrate the equipment?
A: We have our own calibration and third-party calibration.
7.Q :What are the payment methods?
A :The payment methods are T/T, CIF, Paypal, L/C, VISA and so on.
8.Q :How long is the warranty period?
A :Warranty is 1 year, lifetime free service.
9.Q :What is the delivery time for your company's products?
A :This depends on the actual product you order, usually at least 30 days.
){kind=link}