30 M³ Purifier Glass Environmental Chamber Air Purifiers Glass Cabin

• Customization: Available
• After-sales Service: 1 Year
• Power Supply: 380V
• Model NO.: HY
• Certification: CE, TUV, ISO
• Warranty: 1 Year
• Environmental Test Chamber Internal Dime: 3400d×3500W×2500hmmm³
• Temperature and Humidity Range: 10 ~+60 Degrees, 40~70%Rh
• Evenness: Temperature≤2ºC; (No Load)
• Volatility: Temperature;0.5 Degrees
• Instrument Display Accuracy: Temperature: 0.1 Degrees Humidity: 0.1rh
• Ventilation Rate: 1~50 Times/H
• Transport Package: Standard Export Wooden Box
• Specification: Customized
• Trademark: HUANYI
• Origin: China
• HS Code: 9024800000
• Production Capacity: 10000pieces/Year

Product Description

 

Product Description

The purifier glass environment chamber mainly tests the purification efficiency test of the air purifier on-hook, cabinet machine, vehicle-mounted machine, and air duct machine to see whether the test performance meets the standard.

1. Product introduction

The 30 cubic meter glass environmental chamber of the purifier can simulate a polluted indoor environment and test air purification equipment. It is an important tool for testing and researching the performance of air purification products. For studies on the formation of secondary pollutants, such as the formation of ozone and secondary aerosols, the environmental chamber method can also be used to build models.

30 cubic meters purifier glass environmental chamber The environmental test chamber introduced in the national standard GB/T 18801 air purifier is mainly used to test the removal efficiency of air purifiers on particulate matter. The materials used are not suitable for the evaluation of chemical pollutant efficiency. Its application There are certain limitations in scope. In terms of the design of the environmental test chamber for air purifier testing,

Symbio explains the following features:
(1) A stainless steel chamber with a volume of 30 cubic meters;
(2) A combination of inner and outer chambers are used to control temperature and humidity to ensure a constant temperature and humidity of the inner chamber experimental environment;
(3) A combined air filter is installed in the air purification system;
(4) The cabin is equipped with a remote-controlled pollution source generating device.
 

Meet the standards

 

GB/18801-2015	Air Purifier
GB/18803-2002	Indoor Air Quality Standard
GB 21551.3-2010	Antibacterial, sterilizing and purifying functions of household and similar electrical appliances-Special requirements for air purifiers
IEC 62301:2005	Measurement of standby power in household appliances EPA Energy star United States Environmental Protection Agency Energy Star
	EPA Energy star United States Environmental Protection Agency Energy Star
GB 4706.45-2008/IEC 60335-2-65:2005(Ed2.0)	Electrical safety for household and similar purposes - Particular requirements for air purifiers

 

Product Parameters

 

Serial number	Project	Content
A	Environmental test chamber Internal dimensions	3400D×3500W×2500Hmm,30m3.
	Carton size	Box part:3600D×3700W×2950Hmm Crew section:800D×700W×1500Hmm
	Door	Gate width 0.8W*2.0H (meter)
B	Temperature and humidity range	10ºC~+60ºC,40~70%RH.
	Evenness	Temperature≤2ºC; (no load).
	Volatility	Temperature≤±0.5ºC.
	Instrument display accuracy	Temperature:0.1ºC  humidity:0.1RH.
C	Ventilation rate	1~50 times/h.
D	Total installed capacity of equipment	1) Installation power: about 23kw. 2) Actual operating power: related to the ambient temperature and ventilation. Preparation stage: about 18kw. Constant stage: about 12kw. Evacuation stage: about 5kw.
E	Equipment noise	≤75dBA(1m away from the device)
Conditions of use of the equipment:
Serial number	Project
A	Ambient temperature:-10ºC~+35ºC, relative humidity:20~80 RH
B	Ambient air background concentration: formaldehyde is less than 10μg/m3,
C	There should be no high concentration dust, corrosive gas and flammable and explosive atmosphere around.
D	Power supply: AC 380V±10 50Hz±5, three-phase five-wire system, grounding resistance ≤4 (Ω), meeting the requirements of the installed capacity of the equipment.
Chamber structure:
Serial number	Project	Content
A	Test chamber	1. The wall made of stainless steel square pass as reinforcing rib and 10mm float glass 2. The floor (pre-embedded power/ground line) is made of 1.0mm thick SUS304 stainless steel; the top ceiling is 1.0mm thick SUS304 stainless steel. 3.Ground bearing ≥500Kg/m2. 4.4 sets of 60W moisture-proof and explosion-proof lighting fixtures are installed in the environmental test chamber. 5.Corrosion-proof and explosion-proof power sockets need to be reserved. 6.An independent local mechanical pressure gauge (with an alarm device) shallbe installed in the chamber. 7.There are 2 internal explosion-proof and anti-corrosion power sockets, strong and weak electricity are separated, and the strong electricity is 20-30cm away from the bottom of the chamber. 8.The end face seal of the fan side shaft of the circulating fan adopts imported sealed bearings. 9.The cabin is provided with a pressure balance port.
B	Chamber door	1. 1 door, the size of the door opening is 2000Hx800Wmm. The sealing adopts tetraethylene strip + sealing strip (HBC1079 food-gradesealant has passed the EU ROHS environmental protection standard, passed the EU REACH chemical regulation standard, and passed the US FDA food hygiene standard). 2. The hinge can ensure that the opening angle of the door is ≥120 degrees.

Company Profile

 

FAQ

(1) Do you accept customized services?
Yes, of course, we can not only offer standard machines, but also can customize machines according to your requests. Don't hesitate to tell us your requirements, we will try our best to meet your needs.
(2) How about your warranty?
Every machine produced in our factory comes with a 14-month warranty after shipment. Generally, we offer 12 months of FREE maintenance, while considering of shipping time, we can extend for 2 months for our customers.
If your machine doesn't work, you can email us and we will try to find the problem via email or skype video chat if necessary. After confirming the problem, we can send you new instrument accessories or provide on-site maintenance.
(3) What's the delivery term?
At most of time, we have stock in the factory. If there is no stock, normally, the delivery time is 15-20 working days after deposit receipt. If you are in urgent need, we can consider making a special arrangement for you.
(4) How to install and use the product?  
We will email you operating instructions and videos in English, or you can download it directly from our official website.
Most of our machines are already a complete part when shipped, which means that they have already been installed, you only need to connect the power cable and can start to use them. If possible, we can also install your machine on site.
(5) Are your company a trading one or a factory?
We are an industry and trade integrated company, engaged in the research and development and production of test instruments, self-produced and self-marketing, the Foreign trade Department was established in 2007, OEM is also acceptable to us.
(6) How to choose the most suitable products?
Our professional team will give you the best advice, as long as you tell us what kind of testing you need to do and the required specifications.
(7) What is the order process?
Inquiry-Quotation-Communication-Order confirmation-Deposit-Production-Testing and debugging-Balance-Packaging-Shipment-Customer reception-After-sales service
(8) Can we visit your factory before order?
Yes, we warmly welcome and sincerely invite you or your team to visit our factory, we can help to arrange hotel and pick you up at the airport.
(9) How about the packing for machine, is it safely protected during transportation?
Testing Chamber is packed by standard export wooden box for outside package and stretch film for inner package, it won't be damaged. We've delivered many testing machines abroad by sea or by air without damage.