250° C Vacuum High Temperature Chamber for Circuit Board Debubbling

• Customization: Available
• After-sales Service: 1 Year
• Power Supply: AC 380V
• Model NO.: HY
• Warranty: 1 Year
• Temperature Range: Rt+10°ºC~300ºC
• Temperature Fluctuation: ≤0.5ºC
• Temperature Uniformity: ≤2.0ºC Within 200ºC
• Temperature Deviation: ≤±2.0ºC
• Transport Package: Strong Wooden Case
• Specification: Customized
• Trademark: HUANYI
• Origin: China
• HS Code: 9013809000
• Production Capacity: 10000pieces/Year

Product Description

 

Product Description

1. Precision oven/Precision Aging test chamber Scope of application

Precision oven/Precision Aging test chamber  it is suitable for testing, storage, drying and heat treatment of aviation, aerospace, electrical, electronic products, components, parts and materials under high temperature conditions.


2. Temperature control system

The temperature control is a PID microcomputer program control instrument, which can automatically calculate, PV/SV can be displayed at the same time, and can be set by buttons to set multiple temperature and time values;
The output is 12V;
The current controller is SSR contactless RELAY; (solid-state relay controls power output,),
The heating material is a combination of high-temperature resistant stainless steel and high-temperature heating wire;
Temperature range RT+50~600ºC (commonly within 550ºC);

3. Accuracy

Control accuracy ±1ºC;
The temperature distribution uniformity in the box is ±2%ºC;
4. Heating rate
RT-100ºCabout 15 minutes

5. Air supply system

Forced air supply circulation; the air source is driven by the circulation motor to drive the wind wheel through the electric heater, sending the hot air from the upper air duct on the back to the inner box of the oven, and then sucked into the air duct at the lower back to become the air source for recirculation heating, thereby reducing energy loss and ensure the temperature uniformity in the box. When the door opening or closing causes disturbance, the air supply circulation system can be used to quickly restore the operating state temperature value;
The motor is a long-axis high-temperature-resistant special type with a horse rate of 1/2hp/50Hz;
The fan is a multi-blade turbine type 1 set;
Equipped with adjustable air deflectors.
There is a set of air inlets at the rear and a set of air exhaust outlets on the top. The air intake and exhaust volume can be manually adjusted.

Product Parameters

Precise Oven / High Temperature Chambe/Precision Test Chamber
Model		HYOV
Performance	Temperature range	(RT+10ºC) to +200ºC
	Temperature fluctuation	±0.5ºC
	Temperature deviation	≤±2.0ºC
	Temperature uniformity	≤±2.0ºC (RT to +100ºC); ≤±2.5ºC (+101 to +200ºC)
	Heat-up time	From +25ºC to +200ºC in 55min., average 3.0ºC/min.
	Temperature overshoot	≤±2.0ºC
Workspace volume		Customized
Workspace dimensions		W1300mm × H1000mm × D1000mm
Exterior dimensions		Approx. W1700mm × H1750mm × D1200mm
Material	Interior	Stainless steel (SUS304)
	Exterior	Cold-rolled steel with powder coated surface
	Seal	Imported silicone seal
	Insulation	100mm Mineral wool
System	Heating	Nichrome resistance wire heater
	Airflow	Vertical-type
Power requirement		About 6.0KW
Noise level		≤70dB (A-weighted sound pressure level measured at a distance of 1.0 meter)
Allowable ambient conditions		Temperature: +5ºC to +35ºC; Relative humidity: ≤85%RH (No condensation); Air pressure: 86kPa to 106kPa
Electrical supply		AC 380 (1±10%)V (50±0.5)Hz Three Phase 4 Wire  plus Earth Wire
Custom options available

Detailed Photos

Company Information