Shock Testing Machine Horizontal Impact Tester

• Customization: Available
• After-sales Service: 1 Year
• Warranty: 1 Year
• Model NO.: HY
• Max Diameter of Workpiece: Other
• Mass Scope of Workpiece: Other
• Type: Impact Testing Machine
• Maxcapacity: Other
• Accuracy Grade: Other
• Load Way: Other
• Loading Method: Other
• Display: Digital
• Control: Computer Control
• Weight: Other
• Power Source: AC380V
• Oil Cylinder Position: Other
• Maximum Load (Kg): 50/100
• Peak Acceleration (M/S2): 150~3000/150~1500
• Pulse Width (Ms): 18~1/ 50~3
• Table Size (mm): 500×500~800×800
• Shock Wave: Half Sine Wave Back Peak Sawtooth Trapezoidal Wave
• Gas Source: ≤10MPa
• Transport Package: Standard Export Wooden Box
• Specification: Customized
• Trademark: HUANYI
• Origin: China
• HS Code: 9031809090
• Production Capacity: 10000pieces/Year

Product Description

Product Description

The horizontal impact testing machine is used to conduct simulated impact tests on products in the horizontal direction. For slender products that need to be placed in the horizontal direction for testing in the impact direction and simulated as a radial test, a horizontal impact test bench must be used to complete the impact test. Through tests to determine the stress damage caused by this frequency of collision damage to the specimen, the ability of the specimen to resist fatigue damage can be determined. Suitable for electronics, electrical appliances, instrumentation and other industries.

Product features of horizontal impact testing machine:

1. The horizontal impact test bench avoids the structural limitations of air pressure-driven impact in terms of acceleration and long-distance impact, and can accelerate impact tests in a short time on launch specimens. However, in ultra-long launch impact tests, pneumatic drive tests can also be used. We can equip different energy storage drive equipment according to the special requirements of users.

2. Hydraulic braking anti-secondary impact device, which brakes the impact table immediately after the first impact is completed. Prevent second impacts so that accurate impact data can be obtained.

3. The half-sine wave generator and the impact table are integrated designs, which can directly receive the impact transmission signal through the waveform generator. The harmonics of the obtained impact waveform are reduced and the accuracy is high. A powerful damper is placed behind the horizontal impact table, which can ultimately effectively improve the safety performance brought about by high-energy impacts. The horizontal impact test bench is guided by a good guide shaft and carried by guide rails, so that it can be accurately guided and has a long service life. Users can set the impact distance through numbers according to the requirements of the test piece.

Test principle:
It is used to conduct simulated impact tests on products in the horizontal direction. For slender products that need to be placed in the horizontal direction for testing in the impact direction and simulated as radial tests, a horizontal impact test bench must be used to complete the impact test.

Meet the standards

Sampling requirements: Entire product

According to standards: GB/T2423.5, GB/T2423.6, IEC68-2-29.
 

Features

Driven by air pressure, no noise and no pollution.

Stepless adjustment of the buffer.

Gas storage, and the impact energy is adjustable.

Computer control, measurement, and automatic generation of experimental reports.

Various tolerance bands of memory are freely applied.

Selection elements

The weight of the sample and the height of the center of gravity.

The size of the sample. Test conditions. (Acceleration, pulse width)

 

Product Parameters

 

Model	HY-6250	HY-62100
Maximum load (KG)	50	100
Peak acceleration (m/s2)	150~3000	150~1500
Pulse width (MS)	18~1	50~3
Table size (MM)	500×500~800×800
Shock wave	Half sine wave Back peak sawtooth Trapezoidal wave
Gas source	≤10MPA

 

Company Profile

FAQ

1.Q :How to provide after-sales service?
A:If customers need our engineers to come to the site for service, we will send out engineers to provide repair service for you.

2.Q: Can we visit and study in your factory?
A: Welcome to visit and study in our factory, we will show you our R&D and production capacity.

3.Q :Can I install and commission the calibration equipment on site?
A: Yes, we can send technicians and engineers to the customer's site for installation, commissioning and calibration.

4.Q: What are the transportation methods?
A :Air freight, sea freight, railroad transportation, all transportation methods according to the customer's needs.

5.Q : What are the packing methods?
A: Standard export wooden box packaging, solid and firm.

6.Q :How do you calibrate the equipment?
A: We have our own calibration and third-party calibration.

7.Q :What are the payment methods?
A :The payment methods are T/T, CIF, Paypal, L/C, VISA and so on.

8.Q :How long is the warranty period?
A :Warranty is 1 year, lifetime free service.

9.Q :What is the delivery time for your company's products?
A :This depends on the actual product you order, usually at least 30 days.