| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Material: | Stainless Steel |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Compliant with MIL-STD-810 and RTCA DO-160 standards
The high and low temperature low air pressure test chamber mainly used in aviation, aerospace, information, electronics and other fields, to determine the instrumentation, electrical products, materials, components, equipment in the low air pressure, high temperature, low temperature single or simultaneous action of the environmental adaptability and reliability of the test, and can be at the same time on the specimen for the measurement of electrical performance parameters.
It is also suitable for evaluating the ability of transport packaging and unit goods in pressurised cabin and non-pressurised cabin aircraft flying at an altitude of up to 3500m during air transport to withstand the effects of low air pressure and the ability of the packaging to protect the contents, and for ground transport packaging and unit goods at higher altitudes to carry out low air pressure tests.
The test specimen is placed in a high and low temperature low pressure test chamber, then the air pressure inside the chamber is lowered to the equivalent of 3500m altitude, the air pressure is maintained for a predetermined period of time and then brought back to normal pressure.
If necessary, the temperature can also be controlled at the same altitude during this period.
Test equipment.
The air pressure test chamber should have sufficient space to accommodate the test specimen and be capable of air pressure and temperature control.
High and low temperature low pressure test chamber test procedure.
1, the test sample will be placed in the air pressure test chamber, the rate of not more than 150 × 105m Pa / min will be reduced to 650 × 105m Pa (± 5%), in a predetermined period of time to maintain the air pressure, holding time can be selected in 2h, 4h, 8h, 16h.
2,At a pressurisation rate of no more than 150×105m Pa/min, fill with dry air in line with the laboratory temperature to restore it to its initial state
3,After the test, check the damage to the packaging and contents in accordance with the relevant standards and analyse the test results.
Experimental report.
1, the temperature, relative humidity and time of pre-treatment.
2, temperature, humidity, pressure, rate of increase (decrease) and air pressure holding time in the air pressure test chamber.
3. a description of the test equipment and apparatus.
4. a record of the results of the experiment and any phenomena that contribute to the correct interpretation of the test results
5. any differences between the test methods.
|
Model |
HYLA-504A |
HYLA-1000A |
HYLA-504B |
HYLA-1000B |
HYLA-2000B |
|
Internal(DxWxH)cm |
80x70x90 |
100x100x100 |
80x70x90 |
100x100x100 |
120x120x150 |
|
Power consumption(KW) |
11 |
15 |
16 |
18 |
27 |
|
Temp.range |
-40ºC~150ºC |
-70°C ~150ºC |
|||
|
Temp. fluctuation |
±0. 5°C |
||||
|
Temp. deviation |
≥100ºC ,±3.0ºC(Normal pressure no-load),<100ºC ,±2.0ºC(Normal pressure no-load) |
||||
|
Temp. rise and fall rate |
0. 7ºC~1. 0ºC/Minutes(Whole course average) |
||||
|
Pressure range |
Normal pressure~lKpa |
||||
|
Working environment temperature |
+ 5°C ~+35ºC |
||||
|
Power Supply |
AC 380V±10% 50Hz 3 phases and 5 lines (3 fire lines, 1 zero lines, 1 protection lines.) |
||||
1.Q :How to provide after-sales service?
A:If customers need our engineers to come to the site for service, we will send out engineers to provide repair service for you.
2.Q: Can we visit and study in your factory?
A: Welcome to visit and study in our factory, we will show you our R&D and production capacity.
3.Q :Can I install and commission the calibration equipment on site?
A: Yes, we can send technicians and engineers to the customer's site for installation, commissioning and calibration.
4.Q: What are the transportation methods?
A :Air freight, sea freight, railroad transportation, all transportation methods according to the customer's needs.
5.Q : What are the packing methods?
A: Standard export wooden box packaging, solid and firm.
6.Q :How do you calibrate the equipment?
A: We have our own calibration and third-party calibration.
7.Q :What are the payment methods?
A :The payment methods are T/T, CIF, Paypal, L/C, VISA and so on.
8.Q :How long is the warranty period?
A :Warranty is 1 year, lifetime free service.
9.Q :What is the delivery time for your company's products?
A :This depends on the actual product you order, usually at least 30 days.
){kind=link}