Rotary Table Type Centrifugal Acceleration Tester

• Customization: Available
• After-sales Service: 1 Year
• Warranty: 1 Year
• Model NO.: HY
• Max Diameter of Workpiece: <500mm
• Mass Scope of Workpiece: 3-20kg
• Type: Material Testing Machine
• Maxcapacity: <1000KN
• Accuracy Grade: 0.5
• Load Way: Electronic Load
• Loading Method: Dynamic Load
• Display: Digital
• Control: Computer Control
• Weight: 1000-2000Kg
• Power Source: AC380V
• Oil Cylinder Position: Under
• Acceleration M/S2: 30-1000
• Total Load Kg: 100
• Start Timemin: ≤5
• Continuous Working Timemin: 60
• Transport Package: Standard Export Wooden Box
• Specification: Customized
• Trademark: HUANYI
• Origin: China
• HS Code: 8479899990
• Production Capacity: 10000pieces/Year

Product Description

Product Description

Rotary Centrifuge used to determine the force (except gravity) generated by electronic components, small equipment and other electronic products subjected to steady-state acceleration (constant acceleration) environments, such as those produced by vehicles, aerial vehicles, rotating machinery and projectiles. The adaptability and performance of the structure is good, the structural integrity of some components is evaluated, and the electrical parameters of the test sample can be evaluated under the steady acceleration environment.

Rotary centrifuge/Swing Type Centrifuge/Centrifuge Acceleration Test Machine also called a linear acceleration test systems. The system consists in two parts one Mechanical body with motor arrangement coupled with rotating arm and second electronics control panel Speed control unit. A AC/DC Motor is used to rotate the platform mounted on the rotating shaft. Set of current rating slip rings are provided to feed the electrical signal to the specimen under dynamic test condition. System is safe from all protections like Over load, field fail, Door interlock etc.

The system should be installed on a floor. Machine should be positioned such that there is ample clearance for opening doors and for removal of panels and covers from all sides. Controls should be easily accessible and visible for the operator and still allow adequate working room to perform fixturing and testing.
 

Features

1. Real-time computer control, automatic generation of experimental reports;

2. Real-time display of test curves and tolerances, test time;

3. Multi-stage accelerated test can be realized;

4. It can realize open circuit, over limit and over speed protection;

5. Can realize automatic and manual control;

6. The number and size of the current collecting slip ring circuit can meet any test requirements.

Product Parameters

 

Model	HYZP-3	HYZP-5	HYZP-10	HYZP-20	HYZP-005	HYZP-004	HYZP-003
Maximum load (kg)	3	5	10	20	0.05	0.04	0.03
Total load (kg)	15	20	20	40	0.5	0.4	0.3
Acceleration m/s2	300-2000	30-2000	50-1000	50-1000	5000-200000	5000-400000	5000-800000
Sample allowable height (mm)	200	200	300	300
Test article direction	X, Y, and Z directions are respectively performed			X, Y, Z coordinates in six directions
The test center calculates the installation radius (mm) on the turntable	200	200	750	750	100	80~100
Start time (min)	≤3	≤4	≤3	≤3	≤4	≤5	≤5
Continuous working time (min)	60	60	60	60	30	5	5
Power supply and power consumption	AC 380V 1.5KVA		AC 380V 5KVA		AC380V 4KVA	AC380V 6.5KVA
Dimensions (L*W*H)mm	924*910*1242		1953*470*993		800*800*830
Electrical device	15 ring 500V 5A		12 ring 500V 5A
Weight (kg)	1500	1700	2300		2500	1500	100
Control System	Industrial computer system
Fulfil requirements	GB/T2423 GJB150 GJB360 MIL-STD-810F MIL-STD-202F IEC68-2-7 MIL-STD-883C
Remarks	The power-on device and control accuracy can be configured according to relevant standards or user requirements.

 

Company Profile