IP5X IP6X Sand and Dust IP Test Chamber

• Customization: Available
• After-sales Service: 1 Year
• Power Supply: AC 380V
• Model NO.: HY
• Warranty: 1 Year
• Material: Internal Stainless Steel Material
• Humidity Range: ≤85%Rh
• Sand and Dust Dosage: 2~4kg/M3
• Temperature Range: Rt10ºC~60ºC(Heating Dust Baking System)
• Scope of Use: Test Equipment That Artificially Simulates Sand an
• Transport Package: Standard Export Wooden Box
• Specification: Customized
• Trademark: HUANYI
• Origin: China
• HS Code: 8479899990
• Production Capacity: 10000pieces/Year

Product Description

Product Description

IP5X IP6X Sand and Dust IP Test Chamber are capacity of 800 liters 1000 liters, 1500 liters, 2000 liters and larger volume. Considering that some specimens are small and large, so we designed and produced different size and configuration.

Dust IP test equipment are made for the simulation of dust and sand conditions. These dust IP test chambers are used to test the exposure of test the exposure of automotive and electronic components under extreme environmental conditions in order to validate product seal.Dust ingress test methods included IEC60529, ISO20653 and many others.

The airflow circulates upward from the bottom, blowing the dust circulation,forcing dust around the specimens. All models are upgrade to programmable controller and Ethernet access that provides simple operation and control.

The scientific name of the sand and dust test chamber is "sand and dust test chamber". It simulates the destructiveness of natural wind and sand climate on products. It is suitable for testing the shell sealing performance of products. It is mainly used for the two levels of IP5X and IP6X specified in the shell protection grade standard. test. The equipment has a vertical circulation airflow carrying dust. The dust used for testing can be recycled. The entire air duct is made of imported high-grade stainless steel plates. The bottom of the air duct is connected to the tapered hopper interface. The inlet and outlet of the fan is directly connected to the air duct, and then in the appropriate position. The diffusion port at the top of the working room is connected to the working room body to form an "O" type closed vertical dust blowing circulation system, so that the air flow can flow smoothly and the dust can be dispersed evenly to the maximum extent. A single high-power, low-noise centrifugal fan is used, and a frequency converter is used to adjust the wind speed according to test needs.

Features

IPX5 IPX6 IP Rating dust ingress test
IP68 IP54 IP55 dust and rain tests (our rain chambers available)
Internal illumination in test room
Strong stainless steel specimen shelves
Viewing window with wiper
Dust blowing through special wind tunnel and air outlet
Constant dust concentration
Programmable color LCD touch screen controller
Build -in power interface and vacuum system for specimens
Multi-language interface
USB and Ethernet
Reliable performance
Safety protection system
Standard and custom

Meet the standards

GB/T 2423.37IEC60068-2-68, GJB150.12A, etc.
 

Product Parameters

 

Model: HY-130 HY-131 HY-132

Lab equipment Inner chamber size(WxHxD)cm: 80X80X80 100X100X100 120X120X120

Lab equipment Nominal wire diameter of metal mesh: 75UM    

Lab equipment Nominal spacing between wires UM: 75UM

Dust concentration: 2~4kg/m can be measured and controlled adjustment

Dust particle size: ≤32um accounted for 33%; 32um~250um accounted for 67%.

Temperature Range: RT+15ºC ~60ºC

Fine dust: below 75um

Coarse dust: below 150um

Air velocity: less than 2m/s

Amount of talcum powder: 5kg/m³

Dust concentration: 2kg/m (adjustable)
 

Dust test box model	Workshop Dimension Deep X Width X Height(mm)
HY-130	800X800X800
HY-131	800X1000X1000
HY-132	1000X1000X1000
HY-133	1000X1500.X1000
HY-134	1200X1800X1200

 

Company Profile