| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Power Supply: | AC 220V |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
It is mainly used for vehicle high and low temperature storage test, vehicle defrosting and defogging performance test, vehicle cold start performance test, vehicle heating and cooling performance test, vehicle thermal balance test, parts and components high and low temperature resistance test, etc. This product mainly consists of the main body of the climate simulation test chamber, the heating and cooling device, the fresh air/tail exhaust system, the sunlight simulation system, the temperature acquisition system in the warehouse, and the electrical control system.
DIN75220/CIE85, GB/T12535-2021, GB11556-1994, GB/T18297-2001 (reference), GB/T2423.24-2022, GB/T2423.3-2016GB/T12782-2022, QC/T658-2018.
Overall structure: The entire vehicle environmental test chamber has a three-dimensional layout of upper and lower layers. The lower layer is the environmental cabin and the upper layer is the circulating air duct. The wall structure: polyurethane assembled warehouse board with a thickness of 150mm. The outer surface is made of spray-coated colored steel plates (thickness 1.5 mm), the inner surface is made of stainless steel plate (SUS304 thickness 1.2mm). There is an insulating sealing tape on the edge of the warehouse board. After the assembly is completed, silicone sealant is applied, and the two warehouse boards are covered with stainless steel strips to rivet the two warehouse boards. Floor structure: The design structure is basically the same as the wall. In addition, an anti-slip layer and a pressure plate are added. The thickness of the anti-skid stainless steel material is >3mm, the ground bearing capacity is 1200kg/wheel, and the load-bearing treatment is strengthened within the moving range of the cooling fan: the basic structure of the equipment meets the needs of drum equipment insulation.
Net dimensions in the test chamber: Depends on actual usage.
Test warehouse door: vehicle access door, personnel access door with observation window.
Observation windows: Observation windows in the control room, observation windows on each door.
| Temperature range | -40°C~+60°C |
| Temperature control accuracy | ≤±1°ºC(static)/≤±1.5°ºC(dynamic) |
| Humidity range | 20~95%RH |
| Humidity control accuracy | ≤±3%RH |
| Irradiation intensity | 600~1200kW/m (infrared/full spectrum) |
| Irradiation distance | 1.5m-2.5m |
| Irradiation area (mm) | 6000X2500 |
| Datum height | 0.8-1.8m |
| Unevenness | <+10% |
| Spectral range | 280-3000nm |
| Power Factor | 0.98 |
| Light source stability | ≤+2% |
| Warehouse pressure | ±50Pa |
| Exhaust volume | >6000m'/h (at 25°C) |
(1) Do you accept customized services?
Yes, of course, we can not only offer standard machines, but also can customize machines according to your requests. Don't hesitate to tell us your requirements, we will try our best to meet your needs.
(2) How about your warranty?
Every machine produced in our factory comes with a 14-month warranty after shipment. Generally, we offer 12 months of FREE maintenance, while considering of shipping time, we can extend for 2 months for our customers.
If your machine doesn't work, you can email us and we will try to find the problem via email or skype video chat if necessary. After confirming the problem, we can send you new instrument accessories or provide on-site maintenance.
(3) What's the delivery term?
At most of time, we have stock in the factory. If there is no stock, normally, the delivery time is 15-20 working days after deposit receipt. If you are in urgent need, we can consider making a special arrangement for you.
(4) How to install and use the product?
We will email you operating instructions and videos in English, or you can download it directly from our official website.
Most of our machines are already a complete part when shipped, which means that they have already been installed, you only need to connect the power cable and can start to use them. If possible, we can also install your machine on site.
(5) Are your company a trading one or a factory?
We are an industry and trade integrated company, engaged in the research and development and production of test instruments, self-produced and self-marketing, the Foreign trade Department was established in 2007, OEM is also acceptable to us.
(6) How to choose the most suitable products?
Our professional team will give you the best advice, as long as you tell us what kind of testing you need to do and the required specifications.
(7) What is the order process?
Inquiry-Quotation-Communication-Order confirmation-Deposit-Production-Testing and debugging-Balance-Packaging-Shipment-Customer reception-After-sales service
(8) Can we visit your factory before order?
Yes, we warmly welcome and sincerely invite you or your team to visit our factory, we can help to arrange hotel and pick you up at the airport.
(9) How about the packing for machine, is it safely protected during transportation?
Testing Chamber is packed by standard export wooden box for outside package and stretch film for inner package, it won't be damaged. We've delivered many testing machines abroad by sea or by air without damage.
){kind=link}