Special Environment Training Laboratory

Product Description

Product Description

The multi-functional special environment training room is a laboratory that integrates multiple extreme weather environment parameters. The laboratory combines low oxygen, constant temperature and humidity, carbon dioxide adsorption, solar radiation, simulated wind speed, raindrops, sand and dust, and other extreme weather environments.

Meet the standards

 

Simulation Training Pod	External Dimensions	≥4.5m × 4.5m × 3.2m (Length * Width * Height)
	Internal Space	≥4.25m × 4.25m × 2.6m (Length * Width * Height)
	Material	High-density magnesium oxide board insulation layer, thickness not less than 50mm, meeting requirements for corrosion resistance, heat preservation, and flame retardancy, Class A fireproof; PVC flooring, 2mm thick.
	Configuration	4 panel lights; pre-installed sockets including 4 network ports, 4 RS485 ports, and 4 five-hole 220V AC sockets.
	Clean and airtight swing door	1 door, dimensions ≥ 1.0 m * 2.1 m (width * height)
	Observation window dimensions	≥ 0.6 m * 0.6 m
	Surface painting	A multi-coat anti-corrosion process is used, with a primer to enhance adhesion, a mid-coat to improve smoothness, and a topcoat to enhance aesthetics. The surface coating has anti-corrosion and wear-resistant properties.
	Alarm function	When system hardware malfunctions, such as equipment failure or power failure, the system will immediately sound an audible and visual alarm. In case of power failure or emergency, there are prominent and bright escape routes and signs, and portable fire extinguishers are available.
Air Conditioning Unit	One air conditioning unit with temperature control	Cooling capacity ≥ 10kW, heating capacity ≥ 8kW. Capable of regulating the cabin temperature to 18ºC~25ºC.
	Running for 1 hour	It can raise the room temperature to 23ºC±1ºC.
	Temperature control range	18ºC~25ºC
	Temperature deviation	≤±1ºC
	Temperature rise/fall rate	Average temperature rise/fall rate ≥0.5ºC/min when the cabin is unloaded.
	Temperature control system	Consists of refrigeration system, heating system, etc.
Fresh Air Unit	The fresh air handling unit must be able to accommodate at least 5 people at full capacity, with a fresh air volume of no less than 30 m³/person·h.
	Ventilation system	Mainly composed of butterfly valves, ducts, auxiliary fans, and filter purification boxes.
	Ventilation duct material	Polypropylene (PP), with added halogen-free flame retardants, meeting environmental protection requirements; combustion performance reaches B1 standard.
	The air inlet and outlet of the cabin	Both are equipped with filters with an efficiency of not less than 99.95% and a filtration efficiency of ≥99.95% for 0.3μm, ensuring that the air entering the cabin environment is filtered.
Flat panel light	Natural flat panel light ≥ 4 pieces
	Single piece size: 0.6m × 0.3m (length * width)
	Frame material: narrow-bezel aluminum alloy
	Color temperature ≥ 4500K
	Color rendering index Ra ≥ 95
Experimental Platform	The lab bench measures ≥2.5mm*0.75mm*0.8mm (length*width*height), includes a separate small sink and faucet; the surface is made of solid double-sided phenolic resin board with double-layered thickened edges of the same material, and a storage cabinet is provided underneath for storing items.
	Steel Frame	Constructed from 40*60*1.5mm high-quality cold-rolled square steel tubing. The metal surface undergoes acid pickling, phosphating, and other chemical rust-prevention treatments, followed by epoxy resin high-pressure electrostatic powder coating. Screw holes connecting to the connectors are welded using a riveting welding process. All screws on the support frame are international standard hexagonal screws, ensuring excellent corrosion resistance, tightness, and durability without deformation under long-term load.
	Cabinet	Constructed from high-quality 15mm thick MDF with PVC fully automatic edge banding.
	Worktop	Constructed from 12.7mm solid core phenolic resin board, with edges thickened to 25.4mm.
	The laboratory bench comes with two adjustable stools to accommodate different heights.
Hand Sink	Handwashing Sink	Quantity: 1 piece, dimensions: ≥0.6mm*0.5mm*0.3mm (length*width*height), installation height: countertop 800mm from the ground. The sink is made of brand new PP material, free of calcium carbonate.
	The drain and sink are integrally injection molded. The inner wall of the sink is free of shrinkage marks, the four sides are flat, and the surface is smooth and free of obvious defects such as scratches, cracks, bubbles, and edge bursts. The sink wall thickness is 5mm.
Eyewash Station	Tabletop three-port eyewash station, made of thickened copper-plated material.
	Working pressure	0.2~0.4Mpa.
	Eyewash flow rate	≥11.4L/min.
	Operating medium	Standard clean water at room temperature.
	Material	Thickened copper-plated body, with excellent resistance to oil, acid, alkali, and hydrochloric acid solutions.
Monitoring System	Used for monitoring personnel activities within the monitoring cabin. The cameras automatically switch between color and monochrome modes and are used in conjunction with long-range infrared lights to achieve normal monitoring in low-light environments.
	Two cameras	Providing 360° coverage of the training activities of the subjects and the operation of the equipment within the cabin. Pixel count ≥ 4 megapixels, resolution ≥ 2304*1296.
	Hard disk recorder	Supports up to 24 SATA hard drives, with a single hard drive capacity ≤ 10TB. External hard drives can be connected via eSATA interface.
	Hard disk capacity	≥ 24TB. Monitoring footage is recorded 24/7 in real-time on a video disk array in the control room. All recorded data is retained for ≥ 90 days and meets D1, 720P, and 1080P recording quality standards.
Basic Equipment	Circular cable outlet, 200mm in diameter, located at the center of the bottom of the equipment room at the front of the training cabin, primarily used for routing various electrical cables.
	Cable tray	Located in the center of the top of the training cabin, with at least four cable outlets.
	Structured cabling	Pre-installed with Category 6 network cables and telephone lines to the communication cabinet patch panel, allowing for easy removal and maintenance.

 

Application scenarios

This laboratory can be used for athletes' high-altitude training and low-altitude exercise, extreme physical training for athletes, research on human function in hypoxic environments, research on human movement science, research on biopharmaceuticals, human hypoxia rehabilitation therapy, research on human psychology and physiology, research on the performance of electronic equipment, research and testing of clothing materials, and experimental research on biological culture, etc. It has a wide range of applications in scientific research scenarios and is highly applicable.

Company Profile

FAQ

1.Q :How to provide after-sales service?
A:If customers need our engineers to come to the site for service, we will send out engineers to provide repair service for you.

2.Q: Can we visit and study in your factory?
A: Welcome to visit and study in our factory, we will show you our R&D and production capacity.

3.Q :Can I install and commission the calibration equipment on site?
A: Yes, we can send technicians and engineers to the customer's site for installation, commissioning and calibration.

4.Q: What are the transportation methods?
A :Air freight, sea freight, railroad transportation, all transportation methods according to the customer's needs.

5.Q : What are the packing methods?
A: Standard export wooden box packaging, solid and firm.

6.Q :How do you calibrate the equipment?
A: We have our own calibration and third-party calibration.

7.Q :What are the payment methods?
A :The payment methods are T/T, CIF, Paypal, L/C, VISA and so on.

8.Q :How long is the warranty period?
A :Warranty is 1 year, lifetime free service.

9.Q :What is the delivery time for your company's products?
A :This depends on the actual product you order, usually at least 30 days.